Handling Precautions - Docomo Aquos Phone F SH-13C Instruction Manual

Part
Side key
Earphone/Microphone
terminal
External connector
terminal
External connector
terminal cover
Camera/infrared port
panel
Mobile light
Inside back cover
Speaker section
Surrounding section of
speaker section
Sheet
miniUIM slot
miniUIM lever
microSD Card slot
Battery terminal
connector
Battery terminal
Battery storage side
Screw
Battery pack
Battery pack terminal
section
Contents/Precautions
16
Material/Surface
treatment
PC resin/UV coating for
surface
Copper alloy/Gold
plating
SUS/Ni plating
PC resin/UV coating for
surface
PC resin/Hard coating
for surface
ABS resin
PA resin
PE
PE foam
PET resin
SUS
Nylon 46
SUS
LCP
Free-cutting brass/Ni
base, Gold plating
PET/Glass epoxy board
Steel/Ni plating,
Trivalent chromate
PC resin/Spark erosion
Copper alloy/Full
surface Ni with plating
base, Gold plating

Handling precautions

General notes
SH-13C is waterproof/dust-proof,
however, do not allow water to seep or
dust to get in the FOMA terminal and do
not allow accessories or optional parts to
get wet or do not allow dust to adhere.
The battery pack, adapter (including charger micro
USB adapter), wireless charger and miniUIM are not
waterproof/dust-proof. Do not use in humid or steamy
areas such as bathrooms and avoid exposing to rain
and other forms of moisture. If the FOMA terminal is
carried close to skin, perspiration may cause internal
components to corrode and result in malfunction.
Note that if problem is found to be due to moisture,
handset and parts are not covered by warranty and in
some cases may be irreparable. Even where repairs
are possible, repair charges will be incurred, since
damage is not covered by warranty.
Clean only with a soft and dry cloth (such
as the type used for eyeglasses).
Forceful rubbing of LCD with a dry cloth may
scratch LCD surface.
Note also that LCD coating may stain if moisture
or soiling is left on the surface for a long period.
Never use chemicals such as alcohol, thinners,
benzene or detergents, as these agents may
erase the printing on the handset or cause
discoloration.
Occasionally clean terminals with a dry
cotton swab, etc.
Unclean terminals may result in poor connections
and loss of power. Keep terminal clean with a dry
cotton swab, etc.
Take care of the terminal while cleaning it.