Docomo Aquos Phone F SH-13C Instruction Manual page 143

When reserved time arrives
1
[Ready for update.]/[OK]
: Approximately 3 seconds after [Ready for
update.] appears, software update
automatically starts.
: Before software updates, make sure that the
home screen is displayed and the handset is
in a place with a strong signal.
: Software update is performed at the same
time of the following day if the battery level is
below the necessary level to update software
at the reserved time.
: If the alarm or another function takes place at
the same time when the reserved time
arrives, software update is prioritized.
: When SH-13C is turned off at the reserved
time for software update, software update is
performed at the same time as reserved time
after turning on the power.
OS version upgrade
For the flow of OS version upgrade, refer to
"Manual for USB Driver Installation" in PDF
format on http://k-tai.sharp.co.jp/support/d/
sh-13c/download/usb/index.html (in Japanese
only).
Download the major update software and the
USB driver to a PC and connect up PC to the
FOMA terminal using the microUSB cable for PC
(sample) in advance. Also, set the USB
connection mode (nP. 79) to [Fast transfer
mode].
1
Start [
] (Activate major update tool) on a
PC and click [
2 Select [NTT DOCOMO] and
[SH-13C], and click [
: Download the latest major update file to a PC
as needed.
3 When the latest version is
downloaded on the PC, click [
] (version
[ ] (Next)
4
Check the time for update on the
PC and click [
5 When the confirmation screen of
disclaimer appears on the PC,
check the content and click [
(Next) to agree
] (Next)
] (Next)
upgrade)/
] (Next)
]
Appendix/Index
141