1. Manuals
  2. Brands
  3. Docomo Manuals
  4. Telephone
  5. P-01A
  6. Instruction manual

Docomo P-01A Instruction Manual

Prime series
Hide thumbs
Table of Contents

Advertisement

Quick Links

docomo PRIME series
P-01A
'08.10
ISSUE DATE:
NAME:
PHONE NUMBER:
MAIL ADDRESS:
INSTRUCTION MANUAL
Easy Search/Contents/Precautions
Before Using the Handset
Voice/Videophone Calls/PushTalk
Phonebook
Sound/Screen/Light Settings
Security Settings
i-mode/i-motion/i-Channel/i-concier
Full Browser/PC Movie
Camera
i-αppli/i-Widget
Osaifu-Keitai/ToruCa
Map/GPS Function
Data Management
Convenient Functions
Character Entry
Network Services
Overseas Use
PC Connection
Appendix/Troubleshooting
Index/Quick Manual
Mail
1Seg
Music

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the P-01A and is the answer not in the manual?

Questions and answers

Related Manuals for Docomo P-01A

Summary of Contents for Docomo P-01A

  • Page 1 Easy Search/Contents/Precautions docomo PRIME series Before Using the Handset P-01A Voice/Videophone Calls/PushTalk Phonebook ‘08.10 Sound/Screen/Light Settings ISSUE DATE: Security Settings Mail NAME: i-mode/i-motion/i-Channel/i-concier Full Browser/PC Movie PHONE NUMBER: Camera 1Seg MAIL ADDRESS: Music i-αppli/i-Widget INSTRUCTION MANUAL Osaifu-Keitai/ToruCa Map/GPS Function Data Management...
  • Page 2 FOMA terminal and keep them in a safe Before or during use of the P-01A, make sure that you read this manual and the place. Note that we cannot be held responsible for the unlikely event of loss of...
  • Page 3 • You will need your “network ID” to access e-site from i-mode. • If you do not have or you have forgotten your “network ID” or “docomo ID/password”, • No packet communication charges are incurred when accessing e-site from i-mode.

  • Page 4: General Inquiries

    Available from mobile phones and PHSs. • Please confirm the phone number before you dial. • For Applications or Repairs and After-Sales Service, please contact the above-mentioned information center or the docomo shop etc. near you on the NTT DOCOMO website or the i-mode site.

  • Page 5: Menu Icon Setting": Visual

    “Osaifu-Keitai compatible i-αppli which supports the IC card function” is See the next page for details. described as “Osaifu-Keitai compatible i-αppli”. pNote that “P-01A” is referred to as “FOMA terminal” in this manual. P.6 From the Contents pIn the operating procedures of this manual, key operations are described with Search from the contents that categorize functions.
  • Page 6 How to search for “Alarm” is explained here as an example of search method. From the Index P.542 Additional guidance ...457 Address link function... .207 After-sales services.
  • Page 7 Function name Menu number You can find this in (See page 36) Items shown on the Index. display (Some items cannot <Alarm> Function Menu while Alarm is Displayed be executed.) Using Alarm Edit Go to step 1 of “Using Alarm” on page 404. Operation and You can set Alarm to alert you at the specified time with an alarm tone, Detail...
  • Page 8 Easy Search To retrieve a desired function with simple words, refer to the following: To know convenient functions for making calls To change/know display settings To/Not to notify your phone number to the other party To know the meaning of marks (icons) on the display .....<Display> 28 ..................<Caller ID Notification>...
  • Page 9 To use the FOMA terminal with a sense of security Other things you can do ※1 To lock the FOMA terminal from away when it gets lost . <Omakase Lock> To reduce the battery consumption ......<Power Saver Mode> 116 To keep Phonebook entries from prying eyes ......
  • Page 10 Contents ......6 Accessories and Main Options ..20 Early Warning “Area Mail”, Chat Mail, SMS, Web Mail, Main Functions of P-01A... .8 etc. i-mode, iMenu, My Menu,...
  • Page 11 PC Connection Notify of Location, Location History, GPS Settings Data Transfer (OBEX™ Communication), Preparation Flow for Data Communication, AT Command, CD-ROM, DOCOMO Keitai Datalink Picture Viewer, i-motion Player, Video Player, Function List, Options and Related Devices, Appendix/ Chara-den, Machi-chara, Melody Player, Kisekae Tool,...
  • Page 12 Main Functions of P-01A P.215 P.312 ◆i-concier  ◆i-Widget  i-concier is a service that you can be notified of useful information by character i-Widget is a useful function that enables you to easily access any contents or tools (Widget αppli) you often use such as a calculator, clock, TV program list, and stock (Machi-chara image) on the Stand-by display or you can download schedule events (i-schedule events) from sites and use it.
  • Page 13 P.63 P.24 ◆Yuttari Talk  ◆One-push Open  You can slow down the other party’s speaking speed during a call. ■One-push Answer P.67 When a call comes in, just press the one-push open button, and you can open the FOMA terminal to answer the call. ■Recv.
  • Page 14 ■The following symbols show specific directions: Precautions ALWAYS FOLLOW THESE DIRECTIONS ■Before using the FOMA terminal, read these safety precautions carefully so that Denotes things not to do. (Prohibition) you can use it correctly. Don’t After reading the precautions, keep them in a safe place. ■Be sure to observe these safety precautions because they are designed to protect you or those around you from causing injury and to avoid unnecessary Denotes not to disassemble.
  • Page 15 Be careful not to let General precautions for FOMA batteries and adapters/chargers electroconductive materials terminal, batteries, adapters/ specified by NTT DOCOMO, INC. (metal pieces, pencil leads etc.) chargers, and UIM Don’t If you use any type of battery, adapter or...
  • Page 16 Turn off the FOMA terminal in Precautions for FOMA terminal Caution places where use is prohibited such as in airplanes and hospitals. Warning Otherwise, electronic devices and Do not place the FOMA terminal electronic medical appliances may be or accessories on unstable adversely affected.
  • Page 17 Turn off the FOMA terminal when When using the motion tracking, If you erroneously break the display part and then crystal near electronic devices using ensure that you check around liquid gets leaked, never take or high-precision control or weak you for safety, securely take hold Don’t Don’t...
  • Page 18 Itching, rash or eczema may be If the battery fluid gets into your Precautions for batteries caused depending on your eyes, do not rub them. Flush your ■Check the description on the label of the physical conditions or eyes with clean water and seek battery pack for the type of battery.
  • Page 19 AC adapter available overseas: 100 V to Don’t You might be struck by lighting or suffer such as a docomo shop or dispose of it 240 V AC an electric shock. in accordance with local waste disposal [Connect only to household AC outlet] regulations.

  • Page 20: Handling Precautions

    When removing the adapter/ If you use an implanted cardiac Notes on using near electronic charger out of the outlet or pacemaker or implanted medical equipment cigarette lighter socket, do not defibrillator, use the mobile ■The description below meets “Guidelines on forcibly pull the adapter/charger phone 22 cm or more away from the Use of Radio-communication Equipment...
  • Page 21 ■Use a dry soft cloth such as the one for ■Do not use the FOMA terminal with the back Notes on handling the FOMA terminal cleaning glasses to clean the equipment. cover left removed. ■Avoid using in extremely high or low pThe screen of the FOMA terminal sometimes has a The battery pack might come out, or malfunction or temperatures.
  • Page 22 Audio Video Remote Control. (Only with unneeded UIMs to a handling counter such as ■During charging, the adapter/charger may the compatible Bluetooth devices) a docomo shop. become warm. This is not an abnormality, so ■Radio frequencies ■Avoid using in extremely high or low continue charging.
  • Page 23 You will be imposed punishment if you use the mobile 3. For further details, contact “docomo Information phone in your hand while driving. If you answer a call Center” on the back page of this manual.
  • Page 24 Accessories and Main Options <Accessories> <Main Options> pP-01A Handset pP-01A CD-ROM pFOMA AC Adapter 01/02 (With Warranty and Back Cover P29) The PDF versions of “Manual for PC Connection” (With Warranty and Instruction Manual) and “Kuten Code List” are included. pInstruction Manual pBattery Pack P19 pDesktop Holder P28...

  • Page 25: Table Of Contents

    Before Using the Handset Part Names and Functions ......Styles ..........Navigation Displays and Key Operations .

  • Page 26: Part Names And Functions

    Part Names and Functions & " pThe key design in Normal style differs from the one in ■For inserting or pulling the Flat-plug Earphone/Microphone with Switch (option) Horizontal Open Menu. Take hold of the plug and insert or pull it straight into or out. Be careful not to take hold of the cover and plug together when you pull it out.

  • Page 27: Pattern

    x Multi key microSD card slot Light sensor ・ For sensing brightness (See page 116) ・ For inserting microSD card (See page 370) Hook for Horizontal Open Style pDo not cover the light sensor with your hands or do Back cover not put a sticker on it.

  • Page 28: Styles

    FOMA terminal by pressing the one-push open button, be careful not to drop it by its rebound. The P-01A comes with two styles. pWhen you press the one-push open button in Horizontal Open Style, the FOMA ■Normal Style...

  • Page 29: Navigation Displays And Key Operations

    ■Operating command navigation key Navigation Displays and Key Operations ・ Moves the cursor or highlighted ・ Moves the cursor to the right. Key Operations in Normal Style ・ Scrolls forward page by page. display up. (Press and hold to scroll continuously.) (Press and hold to scroll When you want to execute the operation shown on the display in Normal...

  • Page 30: Main Key Operations From The Stand-By Display

    Action in Normal Style Action in Horizontal Open Style Main Key Operations from the Stand-by Key operation (on the vertical display) (on the horizontal display) Display Shows the Full Browser Shows the Mail menu. for a short time Function Selection display. From the vertical Stand-by display in Normal Style or the horizontal (See page 166) (See page 220)
  • Page 31 Action in Normal Style Action in Horizontal Open Style Action in Normal Style Action in Horizontal Open Style Key operation Key operation (on the vertical display) (on the horizontal display) (on the vertical display) (on the horizontal display) for a short time Enters “0”. —...

  • Page 32: Viewing Display

    Viewing Display  " & <Private window> Unread Messages R/F exist. During measuring the current location Battery level (estimate) (See page 44) (See page 181) (See page 328) (yellow) Radio waves reception level (estimate) Location Request Menu is set to “ON” or The area for Messages R/F in the FOMA “Reject numbers unset”, and it is within the Strong...

  • Page 33: Alarm

    During Lock All (See page 128) During recording of a 1Seg program by Backlight is set to “OFF”. (See page 116) Timer Recording (See page 266) During Personal Data Lock (See page 131) View Blind is set to “ON”. (See page 117) During pause of 1Seg program recording During Keypad Dial Lock (See page 135) Backlight is set to “OFF”...

  • Page 34: Using Icons On Desktop

    Missed call to Number B of 2in1 <Desktop Icon> Shows the Missed Call list. (See page 55) Using Icons on Desktop Record message Shows the Record Message list. (See page 72) Notification icon Videophone record message Status icon Desktop icon Shows the Videophone Record Message list.
  • Page 35 ※ The Phonebook could not be updated by Data Security Service Shows it on the PDF viewer. (See page 390) Shows the update display for Data Security Service. (See page 141) ※ Shows it on the ToruCa viewer. (See page 320) Provide Location was executed automatically Shows the Private menu.
  • Page 36 Information Check Details of Desktop Icon pYou may not be able to paste the URL to the desktop depending on the site. mSet./ServiceDisplay pYou can store the title for URL of up to 16 full-pitch/32 half-pitch characters. When the Desktop icon number of characters for the title exceeds that much, the characters in excess are deleted.

  • Page 37: I-Widget Display And Operations

    When a missed call is found i-Widget Display and Operations When the FOMA terminal is closed, “Missed call” appears. You can simultaneously start multiple Widget αppli programs, and can Press < to display the missed call record. The name is display as Widget αppli list on the i-Widget display.

  • Page 38: Selecting Menu

    When i-Channel is received Scroll Selection When “i-Channel ticker” on page 115 is set to “ON” and the In this manual, the description of the command navigation key operation FOMA terminal is closed, tickers flow on the Private window. o after selecting/ (selection of top/bottom/left/right, and press of pPress </>...
  • Page 39 Select a main menu icon from the menu function Select a sub-menu item from the menu function Select “Set./Service” from Main Menu. Main Menu at purchase differs depending on the Select “Talk” from “Set/Service”. body color. (See page 481) pThe highlighted item is the currently selected one.
  • Page 40 Set or check the function Call up the function using the menu number From the Stand-by display, press m75. Some menu items have even more detailed menus. The example below shows how to set “Low tone” for “Quality alarm”. pThe highlighted item is the currently selected one.

  • Page 41: Function Menu

    An actual operation is done as follows: Function Menu If you press i when “ Press ” is shown at the lower right of the display, the Function menu including selectable items such as “Save”, “Edit”, and “Delete” appears in each operation. The contents of the Function menu depend on the display from which you show the Function menu.

  • Page 42: When You Forget Key Operation

    Check box <Guide> With the functions you can select multiple items, put a check When You Forget Key Operation mark for check boxes to select them. Each time you press You can search for the functions you want to know and use, and then ), you can switch “...

  • Page 43: Using Uim (Foma Card)

    Information Using UIM (FOMA Card) pMake sure that you insert/remove the UIM with the FOMA terminal closed and held in The UIM is an IC card that holds your information such as phone your hand. numbers. It can hold data such as Phonebook entries and SMS pTake care not to force the UIM into place because this can break it.
  • Page 44 ・PIN1 code, PIN2 code ・PIN1 code entry set pWhen the UIM is not inserted or when another person’s UIM is inserted, the following ・Validating/Invalidating DOCOMO Certificate 1 and user certificate types of data and files are displayed with the restrictions symbol, “ ”: ・Videophone record messages...

  • Page 45: Attaching/Removing Battery Pack

    UIM (green/white) or have it stolen overseas, immediately contact “■Attaching”, and take hold of DOCOMO to take the steps necessary for suspending the use of the UIM. For the projection of the battery pack inquiries, see “docomo Information Center” on the back page of this manual. Note to lift it up.

  • Page 46: Charging

    1Seg programs and so on for a long time during charging. Select networks Standstill: Approx. 580 hours For environmental protection, bring the unneeded battery [Auto] In motion: Approx. 400 hours pack to an NTT docomo shop, dealer, or recycle shop. Select networks Standstill: Approx. 260 hours Li-ion 00 [Auto] Charging...
  • Page 47 FOMA terminal turned off. The charging time will be longer if you charge the pack may be involved, so consult a handling counter such as a docomo shop. battery pack with the power of the FOMA terminal turned on.

  • Page 48: Checking Battery Level

    When charging only with the AC adapter <Battery Level> Insert the connector with the engraved Checking Battery Level surface facing up until it clicks. Pull straight the connector out while pressing the Cover When the FOMA terminal is turned on, an estimate of the battery level is release buttons.

  • Page 49: Turning Power On/Off

    Check Welcome Mail <Power ON/OFF> o twice or perform the Welcome mail messages have been saved by default. Press Turning Power On/Off operation of “Display Mail from Inbox” on page 164 to show the mail message. Turn Power On Information Press and hold h for at least one pEach entry display appears in the order of “PIN1 code”...

  • Page 50: Configuring Initial Setting

    Information <Initial Setting> pWhen an unset function is found, the Initial Setting display for the unset function Configuring Initial Setting appears each time you turn on the power. pThe completed settings are valid even when total setting is interrupted by an incoming If the date and time, Terminal Security Code, Keypad Sound, Location h or r midway.

  • Page 51: Displaying World Time

    Enter year, month, date and time. <World Time Watch> o to move the cursor and enter numbers by the Displaying World Time numeric keys. pTo enter one-digit numeral for the date and time, enter You can display the time of the specified area on the Stand-by display. two digits beginning with “0”...

  • Page 52: Notifying The Other Party Of Your Phone Number

    <Caller ID Notification> <Own Number> Notifying the Other Party of Your Phone Checking Your Own Phone Number Number pYour phone number (own number) is stored on the UIM. mPhonebookOwn number You can set the FOMA terminal to send your phone number to the called party’s phone when dialing.
  • Page 53 Voice/Videophone Calls/PushTalk Making Calls/Videophone Calls Using Public Mode ......... . If You could not Answer an Incoming Call.

  • Page 54: Making A Call/Videophone Call

    You and the other party can talk viewing each other’s images. Enter the other party’s phone number, DOCOMO videophones conform to 3G-324M, standardized by the international starting with the city code. standard 3GPP. You cannot connect to the videophone that uses a different format.
  • Page 55 Chara-den image to the other party instead of the image through your camera. (See page 73) The digital communication pThe international videophone call is available using the DOCOMO international call charging starts from this service “WORLD CALL”. (See page 60) display.
  • Page 56 If a videophone call could not be connected Auto-redialing The reason why it could not be connected is displayed. (The displayed reason might not If “Voice call auto redial” is set to “ON”, and a videophone call is not connected, a voice be the same as the actual reason depending on the type of the other party’s phone and call is automatically made.

  • Page 57: Switching A Voice/Videophone Call

    Switching a Voice/Videophone Call Switch from a Videophone Call to a Voice Call When the other party’s phone has a function to switch between calls, you You (caller) can switch between a voice call and a videophone call. This can switch from a videophone call to a voice call by selecting “CHG to function is available for the mobile phones that can switch between a voice call”...

  • Page 58: Using Call Records

    ※ Received calls/missed calls of 64K data communication <Redial> <Dialed Calls> <Received Calls> Dialed calls of packet communication Using Call Records ※ Received calls/missed calls of packet communication The FOMA terminal can store the other party’s phone number and date/ Received calls of 64K data communication and packet time you have dialed or received.
  • Page 59 To make a call to a displayed redial item, dialed call record, or Use Received Calls received call record Press Press d to make a voice call. You can make a voice call also by pressing pYou can display the Received Call list also by ) from the detailed display.

  • Page 60: Using Chaku-Moji

    You can display the ring time for missed calls. Even if you message to tell the subject during calling. pFor details on Chaku-moji or compatible models, refer to DOCOMO website or “Mobile [Received Call list only] have set “Missed calls display” of “Ring time” to “Not display”, the missed calls which stopped ringing within the ring start Phone User’s Guide [Network Services]”.
  • Page 61 Information Store Messages pWhen a Chaku-moji message has arrived at the other party’s phone, “Transmission You can store up to 10 Chaku-moji messages in the Message list. completed” is displayed, and you are charged a transmission fee. mSet./ServiceNW servicesChaku-moji pWhen a Chaku-moji message does not arrive at the other party’s phone such as when Create message the other party’s phone is not a Chaku-moji compatible mobile phone or the call is not Highlight <Not stored>...

  • Page 62: Setting Caller Id To Send/Not To Send For Each Call

    Select a sent message. Prefer Chaku-moji pWhen the other party’s phone number is stored in the You can set how your FOMA terminal works for incoming Chaku-moji Phonebook, the phone number, name, and icon are messages for when “Setting when opened” is set to “Answer”. displayed.

  • Page 63: Sending Touch-Tone Signals

    Set “Notify/Not Notify” by Entering “186/184” <Pause Dial> Sending Touch-tone Signals You can select whether to notify the other party of your phone number also by entering “186”/“184” before the other party’s phone number. You can send touch-tone signals from your FOMA terminal to use services such as reserving tickets, checking bank balance, etc.

  • Page 64: Making International Calls

    Phonebook, press and hold 0 for at least one second to enter “+”. You pThe service is not available with some billing plans. can use “+” to make international calls without entering an international pContact “docomo Information Center” on the back page of this manual for inquiries call access code. about WORLD CALL.

  • Page 65: Setting For International Calls

    International Dial Assist Country/Area Code You can make a call adding a country/area code or international call You can store up to 27 country/area codes to be added for making access code to a phone number. (Except for some countries and regions, international calls from overseas.

  • Page 66: Prefix Setting

    )Prefix numbersSelect a name Enter your Terminal Security CodeYES Delete all d or Information pPress l( ) to make a videophone call and press p to make a PushTalk <Delete this> <Delete all> pYou cannot delete the country/area code or international call access code set by call.

  • Page 67: Reducing Surrounding Noise To Make Voice Clear

    Information <Hands-free> pThe reconnectable time differs depending on the usage status and radio wave conditions. Switching to Hands-free An estimate is about 10 seconds and the call charge is applied also for that duration. pWhile you are disconnected, no sound is transmitted to the other party. When you switch to Hands-free, sound such as the other party’s voice is audible over the speaker.

  • Page 68: Receiving A Call/Videophone Call

    For Answering a Voice Call Information pTo connect using a cable (USB connection), set “USB mode setting” to Press d or ) to answer “Communication mode”. the call. p“ ” appears while you are talking or communicating using a USB Hands-free compatible device.

  • Page 69: Switched Between A Call And A Videophone Call By The Other Party

    Information Display for incoming calls pYou might hear beeps (in-call ring tone) during a call. When a caller’s phone number is provided If you have signed up for any of Voice Mail Service, Call Waiting Service, or Call If you store the caller’s name, phone number, and image in the Phonebook, the name, Forwarding Service and set “Arrival call act”...

  • Page 70: Setting Response Of Key Operation For Answering Incoming Calls

    Quick silent Switched from a Voice Call to Videophone Call by the The following are the keys you can press to stop the ring tone, vibrator or voice Other Party guidance: When “Setting when opened” is set to “Keep ringing”, you can open the FOMA The display for switching to a terminal in Normal Style to stop the ring tone, vibrator or voice guidance.

  • Page 71: Setting Response For When Opening Foma Terminal During Ringing

    <Setting when Opened> Set Response for when Closing FOMA Terminal during PushTalk Setting Response for when Opening mSet./ServiceTalkSetting when closed FOMA Terminal during Ringing PushTalkSpeaker call or End the call mSet./ServiceIncoming call Setting when openedSelect an incoming type Information pThis function is disabled when the Flat-plug Earphone/Microphone with Switch Keep ringing or Answer (option) is connected.

  • Page 72: Adjusting Ring Volume

    Information <On Hold> pWhen you adjust the earpiece volume, the sound volume during a Hands-free call or Putting a Call on Hold when You cannot speaker call for PushTalk is also adjusted. Answer Immediately <Ring Volume> During ringingh Adjusting Ring Volume The FOMA terminal makes three rapid beeps for confirmation and the call is put on You can adjust the ring volume for incoming calls and mail.

  • Page 73: Setting Hold Tone

    Press d or ) to release hold and answer Using Public Mode the call. pIf a videophone call is on hold, the image through your camera is sent to the other Using Public Mode (Drive Mode) party by pressing d or ) to release hold.

  • Page 74: If You Could Not Answer An Incoming Call

    When Public Mode (Drive Mode) is activated When Public Mode (Power Off) is activated ・Even when a call comes in, the ring tone does not sound. The “Missed call” icon The setting stays activated until you dial “:25250” to deactivate Public Mode (Power appears on the display and the call is stored in “Received calls”.

  • Page 75: Recording Voice/Video Messages When You Cannot Answer A Call

    Incoming calls when Record Message Setting is set to “ON” <Record Message Setting> Recording Voice/Video Messages when You cannot Answer a Call By activating Record Message, you can play back an answer message to incoming calls and record callers’ voice/video messages when you The ring time elapses cannot answer them even if you have not signed up for Voice Mail...

  • Page 76: Recording A Message When You Cannot Answer Incoming Call

    Information <Play/Erase Messages> pWhen Voice Mail Service or Call Forwarding Service is set at the same time as <Play/Erase Videophone Messages> Record Message, the priority depends on the ring time set for Voice Mail Service or Playing/Erasing Record Messages/a Voice Call Forwarding Service.

  • Page 77: Using Chara-Den

    Erase rec. msg. You can erase all record messages from the Record Message To skip to next message list, and can erase all videophone record messages from the Each time you press > during playback, messages are played back in the following Videophone Record Message list.

  • Page 78: Useful Functions For Videophone Calls

    Substitute Image Useful Functions for Videophone Calls You can set a Chara-den image for “Substitute image” of “Select image”. Switching Cameras Chara-den display/Chara-den list/Chara-den Recording At videophone start-up Inside camera displayi( )Substitute image pFrom the Chara-den list, you can set it also by pressing m( You can switch images to be sent to the other party from through the inside camera to through the outside camera.
  • Page 79 Switch Image Display Positions Zoom You can switch the display locations of the received image and the sent At videophone start-up Wide image. You can adjust the magnification for the camera image to be sent to the During a videophone call, press c( other party.

  • Page 80: Setting Hands-Free Videophone

    White balance You can adjust the colors of the camera image to be sent to <Hands-free with Videophone> the other party, to make the colors look more natural. At videophone Setting Hands-free Videophone Select an item. start-up Fine weather ..For talking outdoors in fine weather Automatic You can set whether to switch to Hands-free automatically for when a Cloudy weather .

  • Page 81: Changing Image Displays For Videophone Calls

    <Select Image> Set by Call Changing Image Displays for Videophone You can set an image to be sent to the other party for making a videophone call. Calls Enter a phone number You can set an image to be sent to the other party. mSet./ServiceVideophoneSelect image call up the detailed display of a Phonebook entry, redial Select an item.

  • Page 82: Setting For Switching A Voice/Videophone Call During A Call

    YESOK Indication OFF pYou can use “ドコモテレビ電話ソフト (DOCOMO Videophone Software)” for the Check indication You can check the setting of the function. application program that supports this function.

  • Page 83: Checking Inside Of A Room When You Are Out

    <Remote Monitoring> Function Menu of the Other ID List Checking inside of a Room when You are Look-up address You can call up a phone number in the Phonebook, Dialed Calls, or Received Calls to enter it. Select an item. You can use the inside camera of the FOMA terminal as a monitoring Phonebook camera to observe the remote location from a phone that has the...

  • Page 84: Pushtalk

    “Other ID”, Remote Monitoring starts after the set ring time, pFor details on PushTalk or compatible models, refer to DOCOMO website or “Mobile even when “Ring time”, “Auto answer setting”, or “Record message setting” is set and Phone User’s Guide [Network Services]”.
  • Page 85 When the other party answers, talk Information while pressing p. pWhether to notify others of your phone number when you make PushTalk calls follows the setting for “Activate” of “Caller ID notification” (see page 48). However, when you When the other party answers, a confirmation tone for set “Notify caller ID”...

  • Page 86: Adding A Member During A Pushtalk Call

    ■Display while dialing/communicating Adding a Member during a PushTalk Call The phone number of the member who has the talker’s right is displayed, and the state of the talker’s right is You can make a PushTalk call to another member during PushTalk displayed in color of the round icon at the upper left.

  • Page 87: Receiving A Pushtalk Call

    Press h to end the communication after talking. Information pFor a member who uses a PushTalk compatible model which does not have this A tone for confirming the end of communication sounds at the other end. pWhen the call you received is a group call, the PushTalk communication itself function, the members added during PushTalk communication are not shown and a continues even if you press h, and the icon indicating that you are not confirmation tone does not sound.

  • Page 88: Adding Entries To Pushtalk Phonebook

    Information View call records You can access a dialed call record or received call record to pWhen a PushTalk call comes in during Lock All or Omakase Lock, “ store it in the PushTalk Phonebook. You cannot store in the ”...

  • Page 89: Making A Call From Pushtalk Phonebook

    Select a search method. Search Information Reading? . . .See page 96. pWhen five or more members are stored in a group, you cannot make a call to all the Group? ..See page 96. members by selecting the group. Select a member.

  • Page 90: Deleting Pushtalk Phonebook Entries

    DEL from PT group See page 86. <Delete from PushTalk Phonebook> [Group list only] Deleting PushTalk Phonebook Entries DEL group See page 86. members PushTalk Phonebook listi( [Member list only] DEL from P-Talk PBDo the following operations. Sound setting See page 87. Select a deleting method.

  • Page 91: Setting For Making/Receiving A Pushtalk Call

    Information Setting for Making/Receiving a PushTalk <Auto answer setting> Call pWhen you set to “ON”, calls are automatically answered even when the FOMA terminal is closed regardless of “Setting when closed”. mSet./ServicePushTalk pWhen you set to “ON”, calls are automatically answered after switching to Hands-free Do the following operations.
  • Page 93 Phonebook Phonebook Available for the FOMA Terminal ....Storing Phonebook Entries ... .<Add to Phonebook> Storing Displayed Phone Number/Mail Address in Phonebook .
  • Page 94 FOMA terminal Phonebook Available for the FOMA Name ○ ○ Terminal Ring tone Vibrator You can use two types of Phonebook, namely the Phonebook in the Illumination FOMA terminal itself, and the Phonebook on the UIM. Picture Chara-den — FOMA terminal ○...
  • Page 95 Phone number You can store up to four phone numbers per Phonebook entry in Name You can enter the name of the person or company in kanji, the FOMA terminal. You can set an icon for each phone number hiragana, katakana, alphabetic characters, or numerals. to categorize mobile phone numbers, office phone numbers, and Enter a name.
  • Page 96 ..Select a piece of location information from Location History numerals or symbol characters. (see page 337) and store it. pWhen the mail address is “phone number@docomo.ne.jp”, Attach from image store the phone number only..Stores the location information from an image. Select a pFor the FOMA terminal, you can set a secret code as well.
  • Page 97 Image The stored still image is displayed when you call up the Illumination You can set an illumination pattern for when a voice call or Phonebook entry. videophone call comes in from the person stored in the Select an item. Phonebook.

  • Page 98: Multitask

    Answer You can set an answer message for Record Message by Storing Displayed Phone Number/Mail message Phonebook entry. Address in Phonebook Select answer messageSelect an answer message. pTo release the stored answer message, select “Release answer You can store the displayed or selected phone number, mail address, message”.

  • Page 99: Contents

    Phone or UIMSelect a storing method. <Group Setting> New . . . Go to step 2 on page 90. Setting Groups Add . . . Adds data to the existing Phonebook entry. When storing data on the UIM, “Overwrite” is displayed. You can utilize the Phonebook by sorting the entries by group such as Select a search methodSearch the Phonebook “Company”...
  • Page 100 Phone number? You can enter a part of the other party’s phone number and <Search Phonebook> search. You can search for the entry even from the middle of Dialing from Phonebooks phone number. Enter a part of the phone numberB You can retrieve stored Phonebook entries by eight search methods.
  • Page 101 About Phonebook List About the detailed display o to highlight a tab, then the detailed contents are displayed. When you search from “All?”, “Reading?”, “Group?”, or pFor the Phonebook entry stored “Memory No.?”, the tabs appear on the top of the Phonebook Group Memory No.
  • Page 102 i-concier information Send phonebook See page 386. pWhen you select a postal address and select “YES”, you can start a GPS compatible Send all phonebook See page 387. i-αppli program set by “Select map” of “GPS settings”, and a map is displayed. When you highlight a postal address and press l( ), the full display appears.
  • Page 103 Copy name You can copy the name of Phonebook entry. Function Menu of the Detailed Phonebook Display Copy phone number/ You can copy each item of Phonebook entry. o to highlight an item Notify caller ID See page 48. pFrom the detailed display, press Copy mail add./ Copy address/ to be copied.
  • Page 104 “phone number” or “phone number@docomo.ne.jp”. It cannot be added to any other number or mail address to be set with a secret code. form of mail address.

  • Page 105: Deleting Phonebook Entries

    <Delete Data> <No. of Phonebook> Deleting Phonebook Entries Checking Phonebook Storage Status mPhonebookNo. of phonebook Delete from the Detailed Phonebook Display Phone Detailed Phonebook displayi( )Delete data Phonebook. . . The number of Phonebook entries stored in the FOMA terminal Do the following operations.
  • Page 106 Information Information pWhen you set “Restrict dialing” to a Phonebook entry of memory number 000 through pWhen multiple similar voice dial names are stored or when the voice dial name is 009, set it to the first phone number in the Phonebook entry. short, the recognition rate lowers and a wrong voice dial entry (Phonebook entry) pWhen you store a Phonebook entry of memory number from 000 through 009 as might be accessed.

  • Page 107: Voice Settings

    Access a voice dial entry following the voice guidance. Information pPronounce the voice dial name as clearly as possible. Once the voice is recognized as a voice dial entry, the detected result is displayed. pBefore and after voice production, avoid making the sounds unrelated to the voice dial pThe FOMA terminal automatically dials out about two seconds after the voice name such as clearing your throat, clicking your tongue, noisy breathing or other guidance informing of dialing finishes.
  • Page 109 Sound/Screen/Light Settings Sound Settings Screen/Light Settings Changing Ring Tone....<Select Ring Tone> 106 Changing Displays ..... .<Display Setting> 113 Setting Sound Effects of Ring Tone or Melody Displaying an Image Stored in Phonebook during Ringing .

  • Page 110: Changing Ring Tone

    Display Title Name of Lyricist/Composer <Select Ring Tone> Ukulele ー ー Changing Ring Tone Waterdrop ー ー ※2※3 Lemon's Road Lemon's Road TOMOYASU MURATA You can set a ring tone for each incoming type. ※1 3D sound is supported. See page 107 for 3D sound. If you select an i-motion movie, the i-motion movie and sound are played ※2 i-motion movie back for incoming calls/messages.
  • Page 111 Information <Melody Effect> pThe priority order of ring tones is as follows: “Read aloud settings” → “Setting for Setting Sound Effects of Ring Tone or Phonebook entry” → “Group setting” → “Select ring tone” (“Set as ring tone” of “Multi number”...
  • Page 112 <Vibrator> <Voice Announce> Informing You of an Incoming Call by Using Recorded Sound as Ring Tone Vibration You can set the sound recorded with the FOMA terminal for a ring tone (including a ring tone for Number B of 2in1), On-hold tone/Holding tone, You can set the vibrator to notify you of incoming calls and mail.
  • Page 113 Information <Quality Alarm> pMelody Call is not available for incoming videophone calls and PushTalk calls. Sounding Alarm when a Line is Nearly pWhen you select “YES” from the confirmation display asking whether to connect to the Disconnecting site, the line is connected to the i-mode site. You are not charged a packet communication fee for connecting to the site for settings, however, you are charged When a call is nearly disconnecting midway due to bad radio wave for connecting to the IP site, i-mode menu site, and free melody corner.
  • Page 114 <Headset Usage Setting> <Manner Mode> Sounding Ring Tone from Earphone Only Muting Tones from FOMA Terminal You can set where you make the ring tone and alarm sound from for Just by pressing a key, you can set to mute tones such as a ring tone and when you connect the Flat-plug Earphone/Microphone with Switch keypad sound from the FOMA terminal.
  • Page 115 Information <Manner Mode Set> pWhen a Flat-plug Earphone/Microphone with Switch (option) is connected, the sound Selecting Manner Mode Type comes out of the earphone. The confirmation display asking whether to play back sound or music files during Manner Mode does not appear. Further, the playback tone You can select one of three types of operations for Manner Mode.
  • Page 116 You can select from among standard “Manner mode” to inform you of Manner Super Original incoming calls or mail by the vibrator, “Super silent” to erase sounds Mode Silent including confirmation tones from the earpiece, or “Original” to Works with the same set value as ①. ToDo alarm Silent ※7...
  • Page 117 ON or OFF LV alarm tone When Calendar/Schedule is set pSee page 44 for LV Alarm Tone (low battery alarm). You can display schedule events of the day (up to 10) or Press l( calendar in the set format on the Stand-by display. You can check the schedule events or calendar and can set schedule events (see page 407) with ease.
  • Page 118 Not to display icons on the Stand-by display Set Displays for Dialing/Calling and Others Press h from the Stand-by display. You can set an image for the Dialing/Call Receiving display, Mail Calendar, schedule events, status icons, notification icons, and desktop icons are Sending/Mail Receiving display, and Checking display.
  • Page 119 Information <Private Window> pThe images or ring tone set at purchase might be displayed or played back for Setting Displays for Private Window incoming calls or messages, depending on the combination of this function and “Select ring tone”. mSet./ServiceDisplayPrivate window pYou cannot set some images for “Display setting”.
  • Page 120 Standard or Constant light Charging <Received Mail/Call at Open> Standard..Lights during charging in the same setting as Displaying Arrival Information by Opening it lights in ordinary time. Constant light ..When 15 seconds elapse without doing any FOMA Terminal operations, the backlight becomes level 1.
  • Page 121 Information <View Blind> pIf “Power saver mode” is set to “ON” and the specified time elapses without doing any Making Display Hard to See from People operations, the FOMA terminal switches to Power Saver Mode and the display goes off. However, the FOMA terminal might not switch to Power Saver Mode depending Around on the function in use.
  • Page 122 Using Kisekae Tool DOCOMO pictographs, and the Internet web pages (sites) supporting i-mode. You can use Kisekae Tool to change the ring tone, Stand-by display, <Menu Icon Setting>...
  • Page 123 Information pFor the functions set by Kisekae Tool, each setting display is shown with “Follow Kisekae Tool” highlighted. You can separately change each setting, however, if you Information want to reset to the setting by Kisekae Tool, you need to perform collective settings pEven if you perform “Reset disp.
  • Page 124 Illum. when closed The Call/Charging indicator lights when the FOMA terminal is <Horizontal Open Menu> closed. ON or OFF Setting Display of Horizontal Open Menu Hourly illumination You can be notified of the specified time (every hour at 0 minutes) mSet./ServiceDisplayHorizontal open menu by the tone and light of the Call/Charging indicator.
  • Page 125 Information Check settings You can check the setting contents for “Incoming illumination”, “Illumination in talk”, “Hourly illumination” and “Side key <Set pattern> illumination”. pThe Call/Charging indicator lights in specified pattern for each illumination when “Set color” is set to other than “Color 1” through “Color 12” and “Gradation”. Incoming Illumination pThe Call/Charging indicator lights by “Standard”...
  • Page 126 > <Font> If you press while the FOMA terminal is closed Changing Character Font When you have a missed call, new mail, new chat mail, or new Message R/F (When the “Missed call” icon, “New mail” icon, “Chat mail”, or “Message R/F” icon is mSet./ServiceDisplayFont displayed on the Stand-by display.) Font 1, Font 2, or Font 3...
  • Page 127 Information Dialed/recv. calls You can set the character size for the Redial, Dialed Calls, pYou cannot change the color of pictographs. Received Calls, Sent Address and Received Address. Large or Standard pYou can set also by mPhonebookPhonebook settings <Character Size> Character sizeDialed/recv.
  • Page 128 When “Select language” is set to “日本語 (Japanese)”, you can Day of week select “日本語 (Japanese)” or “英語 (English)”. pThe setting here applies also to the clock display on the Private window. pIf you set to “英語 (English)”, also region names of World Time Watch are displayed in English.

  • Page 129: Security Settings

    Security Settings Security Code Restricting Outgoing/Incoming Calls or Messages Security Codes Used on FOMA Terminal....126 Setting not to Display Redial/Received Calls Changing Terminal Security Code .
  • Page 130 Even if your security codes are i-mode phone. known and used by a third party, we at DOCOMO take no responsibility in any event ※For “My docomo” and “各種お申込・お手続き (Respective applications/ for the resultant loss.
  • Page 131 Wrong entry 3 times in succession Enter the PIN1 code. Enter PUK (PIN unblock code) pSee page 126 for the PIN1 code. Entry OK Wrong entry 10 times in succession Consult the handling Set new PIN code counter of a docomo shop...
  • Page 132 Enter the new PIN1 code/PIN2 code again. Change PIN1 Code/Change PIN2 Code You need to have set “PIN1 code entry set” to “ON” to change the PIN1 code. <Lock All> mSet./ServiceLock/SecurityUIM setting Restricting Others from Using Enter your Terminal Security Code Change PIN1 code or Change PIN2 code If you set Lock All, you can do no operations other than answering calls and turning on/off the power.
  • Page 133 Information suspension, or if you are a member of DOCOMO Premier Club. Further, if you have pEven while another function is working, Omakase Lock applies after finishing that signed up for Keitai Anshin Pack, you can use Omakase Lock in the fixed bill of Keitai function.
  • Page 134 During Self Mode, the caller hears the guidance to the effect that radio You can set the following functions such as the functions using personal waves do not reach or the power is turned off. If you use DOCOMO Voice information not to be used: Mail Service or Call Forwarding Service, you can use these services in ・Desktop...
  • Page 135 mSet./ServiceLock/SecurityPersonal data lock <Lock Setting> Enter your Terminal Security Code. Setting a Variety of Locks “ ” appears and Personal Data Lock is set. pTo release Personal Data Lock, perform the same operation. When Timer Lock Timer Lock ON At Close ON At Close is set, the display for releasing Personal Data Lock appears also by You can set “Timer Lock ON At Close”...
  • Page 136 PIM/IC Security Mode <Face Reader Setting> Using Face Reader You can set the way to release Personal Data Lock and IC Card Lock. mSet./ServiceLock/SecurityLock setting You can store your face data files in Face Reader and use it for PIM/IC security mode authentication when releasing IC Card Lock or Personal Data Lock.

  • Page 137: Lock Setting

    Information Store pAt shooting, the Call/Charging indicator flickers and the shutter tone sounds To use Face Reader, store 3 or more face data files. You can store up to regardless of the Manner Mode setting. The sound volume for shutter tone cannot be 10 face data files.
  • Page 138 Enter a new Face Reader Security Code (four to eight Recognition-failed Image digits)YES The images not judged as yourself by Face Reader recognition operation are saved. You can use these images to specify who tried to illegally Use Face Reader to Release Lock access your data.
  • Page 139 Information When “Face reader security” is set to “High” pIf you set Keypad Dial Lock, you can send mail only when the address is called up After you are successfully authenticated by Face Reader, your eye blinking is checked. from the Phonebook and when the address stored in the Phonebook is called up from Repeat blinking your eyes slowly.
  • Page 140 Information Activate Secret Mode pWhen an external device such as the Flat-plug Earphone/Microphone with Switch Activate Secret Data Only (option) is connected, the function of the side keys is valid regardless of this setting. mSet./ServiceLock/Security <Record Display Set> Secret mode or Secret data only Setting not to Display Redial/Received Enter your Terminal Security Code.
  • Page 141 Information <Secret Mail Display> pIf you set security for the Outbox and Inbox, mail addresses are not stored in Sent Applying Secret for Mail in Mailbox Address and Received Address. You can set whether to display the mail (secret mail) message from the <Restrictions>...
  • Page 142 Information Restrict Dialing/Call Rejection/Call Acceptance pWhen a call comes in from the phone number set with “Call rejection”, or from other Detailed Phonebook displayi( than the phone number set with “Call acceptance”, the call is stored in “Received Restrictions calls” as a missed call record and the “Missed call” icon appears on the Stand-by display.
  • Page 143 <Call Setting without ID> <Ring Time> Setting Response to Incoming Calls Delaying Start of Ringing Operation without Caller ID mSet./ServiceIncoming callRing time Do the following operations. You can set whether to receive (accept) or not to receive (reject) a voice call, videophone call, and PushTalk call depending on the reason for no caller ID.
  • Page 144 “saved data files”) stored in your FOMA terminal to the You can reject voice calls, videophone calls, and PushTalk calls from the DOCOMO’s Data Storage Center and to restore the saved data files when party whose phone number is not stored in the Phonebook.
  • Page 145 Restoring to your FOMA terminal Setting Data Security Service mLifeKitData Security Service Note that if you delete Phonebook entries from your FOMA terminal and save the Phonebook to the Data Storage Center, the Phonebook entries Do the following operations. on the Data Storage Center are also deleted. When you restore the Phonebook from the Data Storage Center to your FOMA terminal, do the Connect to Center See page 140.
  • Page 146 お預かりデータ更新 (Update stored data) <Initialize> You can update the data in the Data Storage Center and in the FOMA Deleting Saved Data All at Once terminal. You can delete the saved data and reset the setting contents of each mi-concierl(MENU)設定 (Settings) function to the default.
  • Page 147 To update software programs in the FOMA Software Update ■Inquiries terminal when necessary docomo Business Online From personal computers http://www.docomo.biz To protect the FOMA terminal from data liable to Scanning Function ※You may not be able to access due to system maintenance, etc. cause trouble...
  • Page 148 Reference If you want Functions/Service name page To store/check safety information using i-mode i-mode Disaster Message when a disaster occurs Board Service To change the mail address Change Mail Address To reject mail with URL Spam Mail Prevention (Reject Mail with URL) To accept or reject mail from the specified Spam Mail Prevention domain...
  • Page 149 Mail i-mode Mail ......... . 146 Configuring Mail Settings Sorting Mail Automatically to Each Folder .
  • Page 150 Select the address fieldSelect an item. i-mode Mail Phonebook..Call up a Phonebook entry and select a phone number or Once you subscribe to i-mode, you can exchange e-mails over the mail address. Internet as well as among i-mode phones.
  • Page 151 ) and select “Delete receiver” to delete number@docomo.ne.jp”. the selected mail address. Select “YES”. pIf you store the secret code and send mail to a mail address other than that of DOCOMO pPress i( ) and select “Change rcv. type” to change mobile phones, you might not receive the error message for unknown address.
  • Page 152 Delete receiver You can delete the selected address when there are multiple Save template You can save the Deco-mail message you are creating as a addresses. template. YES YES pSee page 205 when templates are stored to the maximum. Select a type of address. Change rcv.
  • Page 153 Copy See page 436. From own number You can convert the location information stored in “Own number” into the URL, and paste it to the i-mode mail text. See page 436. Enter your Terminal Security CodeO Paste See page 436. YES Undo After entering or deleting characters, pasting data, or...
  • Page 154 Press Creating and Sending Deco-mail The Message Composition display is displayed. When editing an i-mode mail message, you can change the size of the Go to step 6 on page 146. font and the color of the background as well as inserting images, thus Information composing your own original mail.
  • Page 155 ■How to use Palette You can insert the image shot by the camera on the spot into Camera Press d from the Message Entry display to display Palette. the text of mail. pWhen the cursor is over the decorated character, the Palette Shoot a still image.
  • Page 156 You can set Font Color, Blink, Font Size, Word Alignment, You can make characters to be entered blink. Select area Select blink Enter text. Ticker and Swing over the selected text you have entered. You can also change the set decoration, add another The set characters are blinking.
  • Page 157 Information Creating and Sending Decome-Anime <Insert image> pYou can insert up to 20 types of images within 90 Kbytes in total. However, you can Decome-Anime is a mail service which enables you to create expressive mail messages which have Flash movies with messages and images, insert up to 2 types of Flash movies.
  • Page 158 Select the text fieldPhone or microSD Select a Decome-Anime template. The editing of the Decome-Anime message is completed. Go to step 6 on page 146. pWhen a Decome-Anime template is already selected, the Edit Decome-Anime display appears. Go to step 4. Information pYou can show the preview of the Decome-Anime template by pressing pYou cannot create a Decome-Anime message when sent mail messages in the...
  • Page 159 Template You can read in a Decome-Anime template to create a <Template> Decome-Anime message. Using a Template to Create Deco-mail/ Phone or microSD Select a Decome-Anime template. Decome-Anime Go to step 4 on page 154. pIf any Decome-Anime template is selected, the confirmation The template is the form data in which text and images are inserted.
  • Page 160 Save insert image You can save images inserted into the template or Deco-mail Function Menu of the Deco-mail Template List text, and set them as the Stand-by display and Wake-up display. Select an imageYESSelect a destination folder. Compose message You can create a Deco-mail message using the contents of Go to step 3 on page 203.
  • Page 161 Delete When you show the Decome-Anime Playback display or preview Delete this See page 156. The animation is played back automatically. The effect tones may sound and the FOMA Delete selected See page 156. terminal may vibrate for some Decome-Anime messages. Further, you can operate from Delete all See page 156.
  • Page 162 FOMA terminal. (See page 375) Phonebook entry. Press i( ) or r to return to the pIf the receiving end is other than P-01A, the sent melody might not be played back former display. correctly or the attachment might be deleted.
  • Page 163 Information Delete Attached File pYou can automatically receive up to 100 Kbytes of an i-mode mail message including You can delete a selected attached file or all attached files. attached files. You can manually obtain the attached files in excess of 100 Kbytes Message Composition display from the i-mode Center.
  • Page 164 Display Newly Received i-mode Mail <Receive Option> Receiving i-mode Mail Selectively Reception Result displayMail Select an i-mode mail message to be You can check the titles of i-mode mail messages held at the i-mode displayed. Center and select them to receive, or delete them at the Center before receiving.
  • Page 165 FOMA terminal is off.) Also, you cannot quote it when using the DOCOMO keitai datalink or infrared pYou can select items to be checked by “Set check new message”.
  • Page 166 Center. pEven if the i-mode mail text contains pasted data, you cannot quote it in your forwarding mail. Also, you cannot quote it when using the DOCOMO keitai datalink or Detailed Received Mail display infrared communication function. See page 167 for pasted data.
  • Page 167 FOMA terminal depending on the file such as an invalid data file or pWhen the sender’s device is other than P-01A, the received melodies might not be whose size is too large. In that case, the confirmation display appears asking played back correctly.
  • Page 168 Select a mail message. Information pWhen you select an unread pYou cannot save a melody in excess of 100 Kbytes to the FOMA terminal. mail message, “ (pink)” pYou cannot save a Flash movie in excess of 100 Kbytes to the FOMA terminal. changes to “...
  • Page 169 Display Mail from Outbox Display Mail from Draft You can save up to 1,000 sent i-mode mail messages including SMS You can edit and send i-mode mail messages and SMS messages in the messages. Draft. You can save up to 20 i-mode mail messages including SMS You can check the sent i-mode mail messages and SMS messages.
  • Page 170 ■Inbox list and detailed Received Mail display How to See Inbox/Outbox/Draft List and Detailed Display ■Mail menu Icons might have the following marks: Unread mail messages or messages are stored in the Inbox. Failed-to-send mail messages are stored in the Outbox.
  • Page 171 Subject <For Inbox list (Date+subject) (Date+sender/receiver)> When “Mail list display” is set to “Date+sender/receiver subject”, the subject is Attached file File with the UIM security displayed up to 11 full-pitch/22 half-pitch characters. When set to “Date+subject”, it is displayed up to 7 full-pitch/14 half-pitch characters, however, for a mail message with i-αppli mail files attached, it is decreased by 1 full-pitch/2 half-pitch character/s as the icon is Feel＊Mail icon...
  • Page 172 ■Outbox list and detailed Sent Mail display Subject When “Mail list display” is set to “Date+sender/receiver subject”, the subject is displayed up to 11 full-pitch/22 half-pitch characters. When set to “Date+subject”, it is displayed up to 7 full-pitch/14 half-pitch characters, however, for a mail message with files attached, it is decreased by 1 full-pitch/2 half-pitch character/s as the icon is added at the top.
  • Page 173 SMS messages address is “phone number@docomo.ne.jp”, the name is not displayed even when “phone number@docomo.ne.jp” is stored in the mail address field in a Phonebook entry. Store the phone number part only to display the name. When a sender’s/ recipient’s phone number or mail address matches a Phonebook entry stored as secret data, the name is not displayed.
  • Page 174 Re-sort in all You can resort mail messages in all Inbox/Outbox folders Managing Mail Messages following the sorting conditions specified by “Auto-sort”. YES Function Menu of the Inbox Folder List/Outbox Folder List pWhen the folder applied with Mail security (see page 170) is found, you need to enter your Terminal Security Code.
  • Page 175 Protect Information <Delete folder> Protect ON/OFF You can protect the mail message so that it is not pYou cannot delete an i-αppli mail folder if corresponding mail-linked i-αppli exists. [Inbox/Outbox] overwritten and deleted. You can protect all the received If the software program does not exist, you can delete the i-αppli mail folder, but this and sent messages.
  • Page 176 Search sender/ You can retrieve mail messages with a mail address or Mail history You can display the history of sent/received mail from the Search receiver phone number of a sender or recipient. [Inbox/Outbox] sender or to the recipient being selected or displayed. Up [Inbox/Outbox] “Search sender”...
  • Page 177 Information No. of messages You can display the number of stored received mail messages, sent mail messages and draft mail messages. <Color label> pColor Label applied to the mail messages is released when they are copied to the Delete microSD card, copied/moved to the UIM, copied/moved from the UIM or sent via YES Delete this infrared rays or iC transmission.
  • Page 178 Move to trash You can move the mail to the “Trash box” folder. The mail Add to phonebook See page 94. [Received Mail only] messages moved to the “Trash box” folder are preferentially Auto-sort You can store a sender or subject as a sort condition. overwritten (deleted).
  • Page 179 Select a record to be displayed. <Sent Address> <Received Address> The detailed display of the Address list is displayed. Displaying Sent/Received Mail Record pWith an SMS message for which the other party’s phone number is not notified, the reason for no caller ID is displayed. Sent and received i-mode mail messages and SMS messages are stored pTo send i-mode mail to the displayed address, press ) and go to...
  • Page 180 Feel＊Mail The Feel＊Mail image is played back. See page 181 for Feel Auto-sort Storing [Received Address only] ＊Mail. pYou can play back the Feel＊mail image also by pressing You can specify a sort condition and folder from the detailed Sent/ Received Mail display.
  • Page 181 Enter a mail address or phone number. Sort all pYou can enter up to 50 half-pitch characters. Subject sort pWhen the mail address is “phone number@docomo.ne.jp”, Reply impossible/Send impossible Address sort (Look-up address/Enter address) enter the phone number only. You can sort SMS messages Address sort (Look-up mail group) as well if you enter the phone number only.
  • Page 182 Release selected You can select mail addresses or phone numbers, and <Mail Group> release the sort condition for them. (The items are deleted Creating Mail Group from the Auto-sort Setting display.) Put a check mark for mail addresses or phone numbers You can store mail addresses by group.
  • Page 183 Mail security See page 137. Function Menu of the Detailed Mail Group Display/Mail Group Address Confirmation Display Secret mail display See page 137. Auto color label You can specify the text color of the sender, received date/time Edit address Go to step 3 on page 178. and others on the Inbox list by mail address.
  • Page 184 Information Receiving display You can set whether to display the Message Receiving and Reception Result displays, even during operation of another <Set check new message> p If you do not want to receive Messages R and Messages F by “Check new function.
  • Page 185 Information <Receive Message R/F> pYou cannot paste the header, signature, and quotation marks to Decome-Anime Receiving Messages R/F Automatically messages and SMS messages. Message services automatically deliver information you want to your Feel＊Mail Settings FOMA terminal. The Feel＊Mail reproduces the atmosphere of a mail message by actions When your FOMA terminal is in the service area, it receives Messages R/ of 45 types of animated characters.
  • Page 186 Information <Display Message R/F> pWhen the Messages R/F exceeds the maximum number of messages that can be Reading Received Messages R/F saved, they are overwritten starting from the oldest one. Unread or protected Messages R/F are not overwritten. lInboxMessageR or MessageF pWhen the FOMA terminal cannot receive any more Messages R/F, “...
  • Page 187 Received date and time Display all After you execute “Sort” or “Filter”, you can reset it and list all The list shows the time for the Message R/F received today, and shows the date for Messages R/F by “By date ↑”. the Message R/F received until yesterday.
  • Page 188 Add to phonebook See page 94. Receiving Early Warning “Area Mail” YES Delete When you receive an Area Mail message, the ring tone for Area Mail sounds. “Ring volume”, “Ring time”, and “Vibrator” follows the settings Early Warning “Area Mail” of “Mail”.
  • Page 189 Chat Member list Receive entry You can register Message IDs for the reports to be received other number@docomo.ne.jp”, store the phone number only. than emergency information. You can register up to 20 IDs. pYou can enter up to 50 half-pitch characters.
  • Page 190 Chat group You can store the members stored in a chat group as chat Exchange Chat Mail Messages members. lChat mail Group list or Member list Group list ..You can select members by chat group. Member list .
  • Page 191 ■Chat Mail display Information Image pWhen the Inbox is full of unread or protected mail messages, you cannot exchange The image you have stored in Chat Group is chat mail messages. Delete unnecessary mail messages or read unread mail displayed. messages, or release the protection and then operate.
  • Page 192 Delete read mails You can delete all the received read chat mail messages and If you start Chat Mail from the desktop or Chat Group sent chat mail messages including secret mail and chat mail If you start Chat Mail from a mail address or from a chat group that is not stored in Chat messages failed to send.
  • Page 193 Phonebook, the image is also set. pYou can enter up to four full-pitch/eight half-pitch characters. pWhen the mail address is “phone number@docomo.ne.jp”, store the phone pNot to change the member’s name, go to the next step. number only.
  • Page 194 SMS messages to and from subscribers of overseas pWhen the number of sent mail messages exceeds the maximum number of storage, carriers other than DOCOMO. For the countries and overseas carriers available for the they will be overwritten starting from the oldest sent mail. However, protected sent service, refer to the DOCOMO Global Service web page.
  • Page 195 Save You can save the SMS message you are composing or editing to Display Newly Received SMS Messages the Draft. pYou cannot save the message when the address field and text Reception Result displayMail Select an SMS message to be field are blank.
  • Page 196 20 half-pitch characters for the address. However, if “:” or but unsuccessfully delivered due to the out-of-service area, etc. “#” is included, you cannot set it for “International”. pYou can reset User Setting to “DOCOMO” by ResetEnter your Terminal lSMS settingsSMS validity period Security CodeYES.
  • Page 197 i-mode/i-motion/i-Channel/i-concier i-mode ..........194 Setting i-mode Setting i-mode .

  • Page 198: Accessing Sites

    i-mode <iMenu> Accessing Sites i-mode is the service that makes use of the display of the FOMA terminal supporting i-mode (i-mode phone) to enable you to use online services You can use a variety of services offered by IPs (Information Providers). such as site (program) access, Internet access, and i-mode mail.
  • Page 199 When you try to obtain an SSL site (SSL page) Information pThe iMenu in English differs slightly from the iMenu in Japanese. The display for establishing authentication appears. When obtaining is completed, the pItems such as Tokusuru Menu and News are not shown on the iMenu in English. SSL page appears and “...

  • Page 200: Flash Function

    Information Information pWhen you display a page stored in cache, you cannot display text or settings you pDepending on the site, the display authenticating your user ID or password might entered when connected before. appear. pWhen Flash movies are displayed, the site behavior might differ from the one for Enter your user ID and password, and then select “OK”.
  • Page 201 Save image See page 203. Phone/Terminal and UIM ID Compose message You can compose an i-mode mail message with the URL/ When you select an item, the confirmation display might appear asking image of a displayed site/screen memo pasted or attached. whether to send the Phone/Terminal and UIM ID.
  • Page 202 Information Reset Last URL <Compose message> You can initialize the URL of the page you viewed last time to the iMenu pThe number of characters of the URL you can paste to the text is up to 256 half-pitch URL. characters.
  • Page 203 URL to access a site, that URL is saved as a different record shop.

Table of Contents