Auto Reheat/Cook Programs - Panasonic NN-SD27HS Operating Instruction And Cook Book

Auto Reheat / Cook Programs
This feature allows you to cook foods by setting the weight. The oven determines the microwave power
level and then gives a cooking time; this cooking time has been developed following extensive testing by
our Home Economists in our development kitchen.
Select the category of food and enter the weight.
Example:
or
Select desired program by
pressing the button once, twice,
three or four times. The program
number and indicators for the
microwave and Auto Cook will
appear in the display.
Notes
The Auto Programs must only be used for foods described.
1. Only cook foods within the weight ranges described.
2. Always weigh the food rather than relying on the package information.
3. Most foods benefit from a standing time, after cooking on an auto program, to
allow heat to continue conducting to the centre
4. To allow for some variations that occur in food, check that food is thoroughly
cooked and piping hot before serving.
32
Set the weight of the food by
using the Time/Weight dial.
Turning the dial slowly will
count up in 10 g steps. Turning
the dial quickly will speed this
process up.
32
Press Start