Example of Programming Active Channels
Active Channels is the fourth Programming
Mode. It allows you to modify the number of
active channels the radio is programmed to
support.
To set Active Channels:
Enter Advanced Configuration Mode and
•
select the desired channel.
•
Short press the PTT button four times to enter the
Active Channels Programming Selection Mode.
The audible voice in the radio announces "Active
Channels" and the current value.
•
Short press the SB1 or SB2 button until you get
the number of channels desired.
•
Long press the PTT button. LED Indicator shows
a green heartbeat to indicate 'Idle' Programming
Mode.
•
Long press the PTT button to exit Programming
Mode or turn OFF the radio.
Example of Programming Weather
Channels (Not valid for RMU4103+)
Weather Channels is the last Programming
mode. It allows you to toggle a radio channel
between 2 way radio mode and weather alert
mode.
To set channels to Weather Alert Mode:
Enter Advanced Configuration Mode and
•
select the desired channel.
•
Short press the PTT button five times to enter
the Weather Channels Programming Mode.
An audible voice announces "Weather Channel
•
and Frequency Used" and instructions on how to
change values. Refer to "Weather Channel
Frequencies Table" on page 48 for the
frequency table.
•
Short press the SB1 or SB2 button to
enable/disable the feature.
•
Long press the PTT button. LED Indicator
shows a green heartbeat to indicate 'Idle'
Programming Mode.
•
Long press the PTT button again to exit
Programming mode or turn OFF the radio.
DRAFT 1
41
English