Storing A Caller Id History Entry In The Directory - AT&T EL51200 User Manual

Caller ID operation

Storing a caller ID history entry in the directory

1. Press CID when in idle mode.
2. Press or
DIR
and find the desired entry.
• If you need to add or remove the area code or a 1 at the
beginning of the number, press # or 1. For details, refer
to step 2 in To view the dialing options on page 39.
3. Press /SELECT. The screen shows EDIT NUMBER.
MENU
4. Use the dial pad keys to modify the telephone number (up to 30 digits).
• Press
DIR
• Press and hold
dialing pause (a P appears).
• Press
MUTE
• Press and hold
5. Press /SELECT to save the number in the display. The screen shows
MENU
EDIT NAME.
6. Use the dial pad keys and refer to Character chart on page 30 to modify
the name (up to 15 characters).
• Press # to add a space.
• Press
DIR
• Press
MUTE
• Press and hold
7. Press /SELECT to confirm.
MENU
NOTES:
• The screen shows ALREADY SAVED if the number is already in the directory. You cannot
save the same number.
• If the directory is full, the screen shows LIST FULL.
• If neither the name nor number is provided, UNABLE TO SAVE appears.
to browse through the caller ID history
CID
or to move the cursor to the left or right.
CID
/PAUSE to enter a three-second
REDIAL
/DELETE to erase digits.
/DELETE to erase all digits.
MUTE
or to move the cursor to the left or right.
CID
/DELETE to erase characters.
/DELETE to erase all characters.
MUTE
41
Christine Smith
888-722-7702
10:30 11/20
PM
EDIT NUMBER
722-7702_
EDIT NAME
Chris_