AT&T EL51200 User Manual page 22

Telephone settings
Handset settings
Dial mode
Use this feature to choose tone (touch-tone) or pulse (dial-pulse) dialing. The
factory setting is TONE. Change this to PULSE only if you do not have touch-
tone dialing service.
1. Press MENU/
2. Press or
DIR
/SELECT.
MENU
3. Press or
DIR
/SELECT.
MENU
4. Press or
DIR
5. Press /SELECT to save the setting and return to the main menu.
MENU
NOTE: If you have dial-pulse (rotary) dialing service only, refer to Temporary tone dialing on
page 21 to temporarily switch from dial-pulse to touch-tone dialing during a call.
in the idle mode to enter the main menu.
SELECT
to scroll to >SETTINGS, then press
CID
to scroll to >DIAL MODE, then press
CID
to select TONE or PULSE.
CID
18
DIAL MODE
TONE