AT&T EL51200 User Manual page 16

Dect 6.0 cordless telephone with caller id/call waiting

Hide thumbs Also See for EL51200:

Table of Contents

Getting started

Wall-mount installation

Wall-mount to tabletop installation

To change the telephone base from the wall-mount position to tabletop

position, follow the steps below.

Unplug the large end of the base power adapter from the electrical outlet.

Slide and remove the wall-mount bracket from the wall-mounting plate. If

the telephone line cord and power adapter cord are bundled, untie them

first. Unplug the end of the telephone line cord from the telephone wall jack.

Lift the telephone base up to detach it from the wall-mount bracket.

Refer to Telephone base and charger installation on page 6 to reinstall the

telephone base.

Table of Contents