Telephone Operation; Making, Answering And Ending; A Call - AT&T EL51200 User Manual

Telephone operation

Making, answering and ending a call
Making a call
To make a call:
1. Press PHONE/
-OR-
Press SPEAKER to use the speakerphone, then wait
for the dial tone.
2. Use the dial pad keys to enter the telephone number.
On-hook dialing (predialing):
1. Use the dial pad keys to enter the telephone number.
• Press
REDIAL
• Press
MUTE
2. Press PHONE/
-OR-
Press SPEAKER to call using the speakerphone.
-OR-
Press and hold
NOTE: Pressing
does not affect the elapsed time.
Temporary ringer silencing
While the telephone is ringing, press
to silence the ringer temporarily on that handset only.
DELETE
This turns off the ringer without disconnecting the call. The
next incoming call rings normally at the preset volume.
NOTE: Unless the ringer volume is turned off on that handset, each handset rings when
there is an incoming call.
, then wait for the dial tone.
FLASH
/PAUSE to insert a three-second dialing pause.
/DELETE to make corrections.
to call.
FLASH
OFF/
CLEAR
PHONE/
FLASH
to return to the idle mode.
to access services from your telephone service provider
OFF/
CLEAR
19
PHONE
The screen displays the
elapsed time as you
talk (in hours, minutes
and seconds).
or MUTE/
0:01:30
888-722-7702
888-722-7702
RINGER MUTE