Control Panel - Zanussi ZWG 580 E User Manual

Control panel

Below is a picture of the control panel. It shows the programme selector dial as well as the
buttons and the pilot lights. These are presented by relevant numbers on the following pages.
1
PROGRAMME selector dial
1
TEMPERATURE selector dial
2
SPIN reduction button
3
OPTIONS button
4
EXTRA RINSE button
5
START/PAUSE button
6
DELAY START button
7
Pilot Lights
8
Table of symbols
= On/Off
= Prewash
= Wool
= Cold wash
= No spin
= Washing
= End cycle
= Door locked
Programme Selector Dial
It allows you to switch the appliance on/off and/
or to select a programme.
www.zanussi.com
2 3 4
Temperature selector dial
This dial allows you to select the temperature
more suitable to the laundry to be washed.
By selecting the position
chine will wash with cold water.
Spin Reduction
By pressing this button you can change the
spin speed of the selected programme.
Available options:
No spin
By selecting this option, all spinning phases are
suppressed and replaced by a drain, so as not
to wrinkle the laundry. Recommended for ex-
tremely delicate fabrics. On some programmes
the rinses will be performed with more water.
Intensive
Select this option for heavily soiled laundry. The
washing cycle intensity will be increased and
the washing time will be prolonged by a few mi-
nutes depending on the type of fabric.
Daily
A cycle to be used for daily soiled cotton, syn-
thetic or delicate items in order to obtain good
washing performance in a short time.
5 6 7
(Cold) the ma-
8
5