Zanussi ZWG 580 E User Manual page 13

Reduce the spin speed by pressing button
3
By selecting a programme, the appliance pro-
poses automatically the maximum spin speed
provided for that programme.
Press button 3 repeatedly to change the spin
speed, if you want your laundry to be spun at a
different speed. The relevant light illuminates.
Select the available options by pressing
buttons 3, 4 and 5
Depending on the programme, different func-
tions can be combined. These must be selec-
ted after choosing the desired programme and
before starting the programme.
When these buttons are pressed, the corre-
sponding pilot lights illuminate. When they are
pressed again, the pilot lights go out. If an in-
correct option is selected, the integrated red
pilot light of the button 6 flashes for 3 times.
For the compatibility among the washing
programmes and the options see chapter
«Washing Programmes».
Start the programme by pressing button 6
To start the selected programme, press the
button 6, the corresponding green pilot light
stops blinking. The pilot lightsA and C illumi-
nate to indicate that the appliance starts oper-
ating and the door is locked.
To interrupt a programme which is running,
press the button 6: the corresponding green pi-
lot light starts blinking.
To restart the programme from the point at
which it was interrupted, press the button 6
again. If you have chosen a delayed start, the
machine will begin the countdown.
If an incorrect option is selected, the red pilot
light of the button 6 blinks for 3 times.
Select the Delay Start by pressing button
7
Before you start the programme, if you wish to
delay the start, press the button 7 repeatedly,
to select the desired delay. The relevant light il-
luminates.
You must select this option after you have set
the programme and before you start the pro-
gramme.
www.zanussi.com
You can cancel or modify the delay time at any
moment, before you press button 6.
Selecting the delayed start:
1. Select the programme and the required
options.
2. Select the delay start by pressing the but-
ton 7.
3. Press button 6:
– the machine starts its hourly countdown.
– The programme will start after the selec-
ted delay has expired.
Cancelling the delayed start after having star-
ted the programme:
1. Set the washing machine to PAUSE by
pressing button 6.
2. Press button 7 once, the light relevant to
the selected delay goes off
3. Press button 6 again to start the pro-
gramme.
The Delay Start can not be selected with
DRAIN programme.
Important! The selected delay can be
changed only after selecting the washing
programme again.
The door will be locked throughout the delay
time. If you need to open the door, you must set
the machine to PAUSE (by pressing the button
6) and then wait a few minutes. After you have
closed the door, press the button 6 again.
Altering an option or a running
programme
It is possible to change some options before
the programme carries them out.
Before you make any change, you must PAUSE
the appliance by pressing the button 6.
Changing a running programme is possible only
by resetting it. Turn the programme selector di-
al to O and then to the new programme posi-
tion. Start the new programme by pressing the
button 6 again. The washing water in the tub
will be not emptied out.
Interrupting a programme
Press the button 6 to interrupt a programme
which is running, the corresponding green pilot
light starts blinking.
13