Table of Contents
Advertisement
AXIS 210/211 - Live View Config
27
External Video
The camera can also display video images from other Axis network cameras and video
servers. These are known as External Video sources. Each external video source is
available from the drop-down list on the Live View page.
Click the Add button to open the External Video Source Setup dialog, which is used to
make all the necessary settings. Enter the IP address or host name of the external video
source you wish to add. The user can then choose to receive either MPEG-2, MPEG-4 or
Motion JPEG video stream.
Sequence Mode
The Live View page can be configured to rotate through the internal and selected external
video sources, in order, or randomly.
Select the desired video sources and enter the time in seconds to display each source (up to
59 minutes). Click Save.
The Sequence buttons will appear on the Live View page to enable the viewer to start and
stop the sequence mode.
Please see the online help
for more information.
Advertisement
Table of Contents
