Overview - Axis 210/211 User Manual

Overview

AXIS 210
Status
indicator
Underside
Power Connector - For connection of the PS-K power adapter (included).
I/O Connector - The I/O terminal connector provides the physical interface to one
transistor output, one digital input and an auxiliary connection point for DC power. For
more information, see The I/O Terminal Connector, on page 42.
Network Connector - The camera connects to the network via a standard network
connector. Supporting NWAY, the camera detects the speed of the local network segment
(10BaseT/100BaseTX Ethernet). This socket can also be used to power the AXIS 211 via
PoE (Power over Ethernet).
Serial Number - This number is used during installation.
Control Button - Press this button to install using the AXIS Internet Dynamic DNS Service
(see page 11) or to restore the factory default settings, as described in Resetting to the
Factory Default Settings, on page 41.
Status
indicator
Focus puller
Mounting screw
DC-Iris control cable
hole
(AXIS 211)
Serial number
Control button
Power indicator
Network indicator
AXIS 210/211 - Product Features
AXIS 211
Tele/wide puller
DC-Iris
Rear panel
AXIS 211
Power connector
Control
cable
I/O terminal
connector
Network connector
(and PoE for AXIS 211)
7