Table of Contents
Advertisement
To Convection Broil, first select Broil and set the oven timer. Then press
the Conv button. Press Start/Stop to start the oven. You may turn off
the convection fan at any time by pressing the Conv button again. As
with regular Broil, the oven will begin counting down. When it reaches
zero, the oven will beep and the heating elements will turn off. You may
stop and turn off the heating elements at any time by pushing the
Start/Stop button.
DEFROST BUTTON
The Defrost button can be used with either the Toast or Bagel functions.
Defrost is designed to first defrost and then toast bread. Select either
the Toast or Bagel setting and select your desired shade using the dial.
You may press the Defrost button either before or after setting the
shade. After pressing the Defrost button and setting the shade, press
the Start/Stop button to begin toasting. The oven will beep at the end of
the cycle and the oven will turn off. You may press Start/Stop at any
time to stop toasting and turn off the heating elements.
CLOCK BUTTON
To set the displayed time of day, press the Clock button. The time will
begin flashing in the display.
Set PM by turning the dial to either show PM or hide PM. Wait a few
seconds until PM stops flashing, then turn the dial to begin setting the
hour.
To set the hour, turn the dial and again, wait until the hour stops
flashing then turn the dial to set the minutes.
The clock will automatically stop flashing after you set the minutes.
NOTES
Increasing or Reducing Cooking Time Mid-Cycle
In Bake, Broil, Reheat, and Keep Warm modes you can change
selected cooking time during the heating cycle by simply pushing the
Timer button. When the displayed time begins to flash, turn the
Selector dial to choose new time. When numbers stop flashing, your
new time is set. DO NOT push Start/Stop again – that would turn off
the oven heating elements.
Increasing or Reducing Temperature Mid-Cycle
In Bake, Leftover and Keep Warm modes, you can change selected
cooking temperature during the heating cycle by simply pushing the
Temperature button. When the displayed temperature begins to flash,
turn the Selector dial to choose a new temperature. When numbers
stop flashing, your new temperature is set. DO NOT push Start/Stop
again – that would turn off the heating elements.
Increasing or Reducing Shade Mid-Cycle
In Toast or Bagel modes, you can also change selected shade setting
during the heating cycle by pushing the Shade button. When the
displayed shade begins to flash, turn the Selector dial to choose a new
shade. When the shade setting stops flashing, your new shade is set.
DO NOT push Start/Stop again – that would turn off the heating
elements.
CLEANING AND MAINTENANCE
Always allow the oven to cool completely before cleaning.
1. Always unplug the oven from the electrical outlet.
2. Do not use abrasive cleansers, as they will damage the finish.
Simply wipe the exterior with a clean damp cloth and dry
thoroughly. Apply the cleansing agent to a cloth, not to the
toaster oven, before cleaning.
3. To clean interior walls, use a damp cloth and a mild liquid soap
solution or a spray solution on a sponge. Never use harsh
abrasives or corrosive products. These could damage the oven
surface. Never use steel wool soap pads on interior of oven.
4. To remove crumbs, slide out the crumb tray and discard crumbs.
Wipe clean and replace. To remove baked-on grease, soak the
tray in hot sudsy water with nonabrasive cleaners. Never operate
the oven without the crumb tray in place.
9
Advertisement
Table of Contents
