Advanced Measuring Procedure - Lutron Electronics TM-925 Operation Manual

Note :
1) If intend to change the data logger sampling time, please
refer section 5-4, page 12.
2) If intend to know the space of balance data numbers into the
memory IC, please refer section 5-5, page 13.
3) If intend to clear the saving data from the memory please
refer section 5-6, page 13.
5. ADVANCED SETTING
PROCEDURE
Before executing advanced adjustment
procedures, exit the " Hold function " and the
Record " function.
a. Hold the " Setting Button " ( 3-5, Fig. 1 ) at least five
seconds will enter the Advanced Setting
Procedures.
b. One by one to press the " Setting Button " ( 3-5, Fig. 1 )
once a while to select the seven main function and show
the text the lower display as :
K...........Change thermocouple type to type K or type J
.......... Change the Temp
℃
OFF.......Auto power ON/OFF management
SP-t......Change the data logger sampling time
SPACE...To show the balance data numbers in the memory
CLr........Clear the existing saving data from the memory
Code.....Code entering for the further calibration usage
, unit
℃ ℉
11