Hot Plug Capable (Available when the device is detected by the system)
Use this feature to enable hot plug support for PCIe root ports 3A~3D. The options
are Disable and Enable.
PCI-E Completion Timeout Disable
Use this feature to enable PCI-E Completion Timeout support for electric tuning. The
options are Yes, No, and Per-Port.
South Bridge
Legacy USB Support
This feature enables support for USB 2.0 and older. The options are Enabled and Dis-
abled. Default setting is Enabled.
XHCI Hand-off
When this feature is disabled, the motherboard will not support USB 3.0. Options are
Enabled and Disabled. Default setting is Disabled.
Port 60/64 Emulation
Select Enabled for legacy I/O suppport for USB devices such as mice and keyboards.
The options are Enabled and disabled. Default setting is Enabled.
Server ME (Management Engine) Configuration
This feature displays the following system ME configuration settings.
•
General ME Configuration
•
Operational Firmware Version
•
ME Frimware Type
•
Recovery Firmware Version
•
ME Firmware Features
•
ME Firmware Status #1
•
ME Firmware Status #2
•
Current State
•
Error Code
85
Chapter 4: BIOS