Loading A Data Cartridge; Figure 21 Loading A Super Dlttape Ii Data Cartridge - Quantum Tape Drives A-Series User Manual

Loading a Data Cartridge

Figure 21 Loading a Super
DLTtape II Data Cartridge
Quantum A-Series Tape Drives User's Guide
Complete this subsection to load a data cartridge into the front of the tape
drive; see figure 21 as needed.
1 Insert the data cartridge into the front of the tape drive, as shown in
figure 21.
2 Push the data cartridge fully into the tape drive.
The LED flashes to show that the media is loading. When
Drive Status
the media reaches the Beginning of Tape (BOT) marker, the LED
lights steadily. The data cartridge is now ready for use.
Data Cartridge
Tape Drive
Drive Status LED
Loading a Data Cartridge
Eject Button
69