Figure 2 Certificate of Security
Resetting System Defaults
Quantum A-Series Tape Drives User's Guide
As there is no access to the A-Series tape drive other than the Ethernet
port, a mechanism has been implemented to reset the settings to their
default values. This is useful if an end user loses the IP address of the
A-Series tape drive.
The system defaults are as follows:
Name
Static IP address
Netmask
Main login
Username
Default password
Chapter 2 Getting Started
Resetting System Defaults
Password/Setting
10.10.10.10
255.255.255.0
admin
root
password
7