Figure 9 Sdlt 600A Tape Drive Front Panel Leds - Quantum Tape Drives A-Series User Manual

Figure 9 SDLT 600A Tape
Drive Front Panel LEDs
Quantum A-Series Tape Drives User's Guide
Stage What You Observe
4 When POST is complete, the middle LED stops flashing
and remains illuminated; the left LED turns off, and right
LED remains off.
POST If POST fails, the middle and right LEDs illuminate
Failure steadily and the left LED flashes.
If a data cartridge is in place when power is turned on, all
Note:
stages remain the same except Stage 3. It may take a
considerably longer time for Stage 3 to complete due to tape
rewind and searching operations that occur during that stage.
Green/Orange LED
(Cartridge Status)
Green LED
(Drive Status)
Yellow LED
(Cleaning Required)
Chapter 3 Using Your Tape Drive
Power On Self-Test (POST) Troubleshooting
24