Quantum Tape Drives A-Series User Manual page 71

Quantum A-Series Tape Drives User's Guide
• Do not carry data cartridges loosely in a box or any other container.
Allowing data cartridges to jostle together exposes them to
unnecessary physical shock.
• Always observe the proper environmental conditions for storing data
cartridges. Refer to the data cartridge reference card supplied with
each data cartridge. The ambient operating environment for the data
cartridge is
Temperature
Relative Humidity
Note: If storage or transportation of a data cartridge has exposed
it to conditions outside the ambient values shown above,
you should condition the data cartridge to its operating
environment for a 24-hour period.
• Maintain clean and smoke-free operating and storage environments.
• Never expose the data cartridge to moisture or direct sunlight.
• Do not place data cartridges on or near devices that may produce
magnetic fields, such as computer monitors, motors, or video
equipment. Such exposure can alter or erase data on the media.
• Avoid unnecessary opening of the data cartridge door; this may
expose the media to contamination or physical damage.
• Do not touch or allow direct contact with the media or tape leader.
Dust or natural skin oils can contaminate the data cartridge and
impact media performance.
• A dropped data cartridge may have dislodged, loosened, or damaged
internal components. If you drop a data cartridge, give it a thorough
visual inspection, as described in
Procedure.
• Never apply adhesive labels or "sticky" notes on the top, side, or
bottom of your Super DLTtape II data cartridge. Only use the slide-in
type label provided with each data cartridge and slide it into the label
slot on the data cartridge.
• Do not use graphite pencils, water-soluble felt pens, or other debris-
producing writing instruments on your labels. Never erase a label—
replace it.
Data Cartridge Handling Guidelines
° ° °
10 C to 40 C (50 F to 104
20% to 80% (non-condensing)
Data Cartridge Inspection
°
F)
55