Figure 36 SDLT 600A Tape
Drive Front Panel LEDs
POST Troubleshooting Tips
SDLT 600A Product Manual
Green/Orange LED
(Cartridge Status)
Green LED
(Drive Status)
Yellow LED
(Cleaning Required)
Table 4
provides troubleshooting tips that you will find useful in the
3
event that your tape drive fails its POST.
If, after attempting the recommended actions listed in the table, the
problem still exists or recurs, a hardware failure may be the cause.
Contact your service representative.
Chapter 3 Using Your Tape Drive
Power-On Self-Test (POST) Troubleshooting
50