Page 1
PORTABLE AIR CONDITIONER (LOCAL) OPERATING INSTRUCTIONS Read the instructions carefully before operating the appliance or carrying out maintenance work. Observe all the safety instructions; failure to do so may lead to accidents and/or damage. Store these instructions in a safe place for future reference. V 12/17...
Page 2
GENERAL OPERATING AND SAFETY INSTRUCTIONS This appliance is a portable air conditioner designed for domestic use. Only use this air conditioner as described in this manual. Ensure that the required voltage and frequency (220-240 V / 50 Hz) match the available power source.
Page 3
Do not install the air conditioner in rooms potentially subject to water sprays (e.g. laundries). This air conditioner can be used by children of 8 years or older and by persons with reduced physical, sensory and mental abilities, or lacking the necessary experience and knowledge, provided they are supervised or instructed on its use by a person responsible for their safety, so that they are fully aware of the attendant risks.
Page 4
Please wait at least 3 minutes before starting the unit. This helps prevent the compressor from being damaged. WARNING! In the event of an anomaly, switch the appliance off and unplug it from the socket. Do not dismantle or attempt to repair or modify the product.
DESCRIPTION OF THE APPLIANCE FRONT VIEW UPPER PANEL CONTROL PANEL – BUTTONS FOR OPERATION WITHOUT REMOTE CONTROL HANDLE FINS AND AIR FLOW OUTLET FRONT STRUCTURE REAR STRUCTURE SWIVEL CASTERS BASE UPPER FILTER 10) DRAINAGE HOLE FOR DEHUMIDIFICATION FUNCTION 11) CABLE REEL REAR VIEW 12) AIR OUTLET AND FITTING 13) LOWER FILTER...
APPLIANCE START-UP Open the packaging and pull out the box. Remove the product and the elements supplied (illustrated in the box below). Infrared remote control Type-AAA – LR03 – 1.5 V batteries for remote control. Round fitting for window unit, to Window unit kit with plug.
USE WITH WINDOW UNIT KIT (accessory managed separately) 1. Make a hole having a diameter of roughly 133 2. Insert the window unit into the window. mm on the glass window. 3. Insert the round fitting into the retractable flexible 4.
OPERATING MODES 1. COOLING MODE The “Cool” LED on the control panel will turn on. The temperature can be adjusted to between 16 °C and 31 °C. In this mode, each time the ON/OFF button is pressed the unit switches off, the appliance saves the temperature setting and retains this setting when it is switched on again.
Continuous drainage Dehumidification WARNING! When using the air conditioner in dehumidification mode, it is advisable to always arrange for continuous drainage, so as to maximise dehumidification efficiency. Connect one end of the PVC pipe (not provided) to the upper discharge hole and place the other end above a drain. REMOTE CONTROL OPERATION Slide the cover open in the direction indicated by the arrow.
FOR OPTIMAL REMOTE CONTROL OPERATION, POINT THE TRANSMITTER HEAD TOWARDS THE RECEIVER ON THE AIR CONDITIONER. ON/OFF BUTTON BUTTON MODE SLEEP BUTTON DOWN BUTTON UP BUTTON SPEED BUTTON TIMER BUTTON ON/OFF BUTTON SPEED BUTTON MODE BUTTON 6a LOW VENTILATION 2a COOLING 6b HIGH VENTILATION 2b DEHUMIDIFYING TIMER BUTTON...
(3) SLEEP BUTTON (on the remote control and on the control panel) In cooling mode, press the UP and FAN buttons to activate the Sleep mode, after which the unit will return to the silent mode and save energy. N.B.: The Sleep function is not available in the dehumidifying or fan modes.
Page 12
3. Storage. When the air conditioner is not expected to be used for a long time, clean the filters before storing it away. Keep the appliance in a vertical position at all times. Do not place heavy objects on top of the air conditioner. It is advisable to protect the appliance with a plastic sheet.
Need help?
Do you have a question about the Holly and is the answer not in the manual?
Questions and answers