Intel Ethernet X520 10GbE Dual Port KX4 Mezz User Manual page 128

Event Message
ID
38 PROBLEM: The driver failed to initialize properly. You may not be able to change the adapter
settings.
ACTION: Install the latest driver from
tel.com/support/go/network/adapter/home.htm
ACTION: Restart the computer.
39 PROBLEM: The network adapter driver did not unload successfully.
ACTION: Install the latest driver from
tel.com/support/go/network/adapter/home.htm
ACTION: Restart the computer.
40 Intel SmartSpeed has downgraded the link speed from the maximum advertised.
41 The adapter driver has been stopped.
42 The network adapter driver has been started.
43 PROBLEM: Could not allocate shared memory necessary for operation.
ACTION: Reduce the number of transmit and receive descriptors, then restart.
44 PROBLEM: Could not allocate memory necessary for operation.
ACTION: Reduce the number of transmit and receive descriptors, then restart.
45 PROBLEM: Could not allocate a resource pool necessary for operation.
ACTION: Reduce the number of transmit and receive descriptors, then restart.
46 PROBLEM: Could not initialize scatter-gather DMA resources necessary for operation.
ACTION: Reduce the number of transmit descriptors and restart.
47 PROBLEM: Could not map the network adapter flash.
ACTION: Install the latest driver from
tel.com/support/go/network/adapter/home.htm
ACTION: Try another slot.
48 PROBLEM: The fan on the network adapter has failed.
ACTION: Power off the machine and replace the network adapter.
49 PROBLEM: The driver was unable to load due to an unsupported SFP+ module installed in
the adapter.
ACTION: Replace the module.
ACTION: Install the latest driver from
tel.com/support/go/network/adapter/home.htm
50 PROBLEM: The network adapter has been stopped because it has overheated.
ACTION: Restart the computer. If the problem persists, power off the computer and replace
the network adapter.
51 PROBLEM: The network adapter link speed was downshifted because it overheated.
52 PROBLEM: The network adapter has been stopped because it has overheated.
Jumbo Frames cannot be configured when MACSec is enabled.
53
PROBLEM: A malicious VF driver has been detected.
54
NOTE: This message is used only for the following adapters:
Intel® Ethernet X520 10GbE Dual Port KX4 Mezz
l
Intel® Ethernet X520 10GbE Dual Port KX4-KR Mezz
l
Intel® Ethernet Server Adapter X520-2
l
Intel® Ethernet Server Adapter X520-T2
l
Intel® Ethernet 10G 2P X540-t Adapter
l
http://www.in-
.
http://www.in-
.
http://www.in-
.
http://www.in-
.
Severity
Warning
Warning
Informational
Informational
Informational
Error
Error
Error
Error
Error
Error
Error
Error
Error
Error
Informational
Warning