Intel Ethernet X520 10GbE Dual Port KX4 Mezz User Manual page 124

Event Message
ID
24 E1express:
PROBLEM: Could not start the PRO/1000 adapter.
ACTION: Install updated driver.
25 E1express:
PROBLEM: MDIX setting conflict with the AutoNeg Settings. MDIX will not work.
ACTION: Enable AutoNeg and restart.
26 E1express:
Link has been established.
27 E1express:
Link has been disconnected.
28 E1express:
Link has been established.
29 E1express:
PROBLEM: Could not start the gigabit network connection.
ACTION: Connect cable to the network device and restart, or disable Link Based Login and
restart.
30 E1express:
The PRO/1000 adapter is set up for auto-negotiation but the link partner is not configured for
auto-negotiation. A duplex mismatch may occur.
31 E1express:
Spanning Tree Protocol has been detected on the device your network connection is
attached to.
32 E1express:
Link has been established: 1000Mbps.
33 E1express:
Link has been established: 100Mbps full duplex.
34 E1express:
Link has been established: 100Mbps half duplex.
35 E1express:
Link has been established: 10Mbps full duplex.
36 E1express:
Link has been established: 10Mbps half duplex.
37 E1express:
PROBLEM: Could not allocate all resources necessary for the high priority transmit queue.
ACTION: Reduce the number of transmit descriptors and restart.
ACTION: Disable multiple transmit queues feature and restart.
38 E1express:
The driver failed to initialize properly.
You may not be able to change the adapter settings.
To resolve, reload the driver.
39 E1express:
Adapter unload process may have not completed successfully.
Driver may not be unloaded.
To resolve, reboot the system.
40 E1express:
Smart Speed has downgraded the link speed from the maximum advertised.
Severity
Error
Warning
Informational
Warning
Informational
Error
Warning
Informational
Informational
Informational
Informational
Informational
Informational
Warning
Warning
Warning
Informational