Use; Intended Use; Attaching/Removing The Hose; Attaching/Removing The Telescopic Tube - Beko BKS 2226 User Manual

3

Use

3.1 Intended use

The appliance was designed to be used in houses,
and is not fit for industrial use.
3.2 Attaching/removing the
hose
1. To attach the hose (11) push the hose cap (12)
to match it with the suction nozzle.
• The tabs on the hose cap (12) must be seated
correctly.
2. To remove the hose (11) press on the tabs on
the hose cap (12) and pull it.
3.3 Attaching/removing the
telescopic tube
1. Attach the telescopic tube (13) to the handle
(10).
2. Pull the telescopic tube from the handle (10) to
remove it.
3. Push the telescopic tube adjustment latch (15)
in the arrow direction and pull the telescopic
tube (13) to adjust its length.
3.4 Attaching/removing the
parquet/carpet brush
You can install/remove the telescopic tube (13)
from/to the parquet carpet brush (14).
Vacuum cleaner / User manual
3.5 Adjusting the parquet/

carpet brush

By pressing the adjustment latch (14) located on
the parquet carpet brush;
• Use " " position for hard surfaces and
parquet.
• Use " " for carpets.

3.6 Operation

1. Plug the appliance after pulling the power plug
located at the back of the appliance.
2. Press on/off button (5) to switch on your
appliance.
3.6.1 Adjusting the suction
power
You can adjust the suction power of the appliance
by turning the suction power button (4) located on
the body of the device clockwise according to the
type of the surface to be cleaned. To decrease the
suction power turn the button counterclockwise.

3.6.2 Dust indicator

When the dust bag is full the dust indicator (9) on
the body will light in red. Replace the dust bag (see
4.1).
7 / 85 EN