10: Approved Pvc/Cpvc Vent Components - Rinnai RU80i Manual

Parts Information (continued)
Vent Components and Assigned Equivalent Lengths:
The following fittings and accessories (by others) are certified for use with the above mentioned condensing
products:
Table 10: Approved PVC/CPVC Termination Components
OEM OEM # orCert.
196006 / 197009
IPEX
(Purchased 196021 /197021
separately )
(System 636)
IPEX
(Purchased
separately )
(System 636)
Field Supplied
Comply with CAN/
PVC/CPVC Sch.
CGA B149.1 &
40 Fittings or
Approved Equal
Field Supplied
Comply with CAN/
PVC/CPVC Sch.
CGA B149.1 &
40 Fittings or
Approved Equal
Field Supplied
Comply with CAN/
PVC/CPVC Sch.
CGA B149.1 &
40 Fittings or
Approved Equal
IPEX
(Purchased
separately )
Field Supplied
Comply with CAN/
PVC/CPVC Sch.
CGA B149.1 &
40 Fittings or
Approved Equal

Vent screens are not ULC S636 Certified.

Friction fit vent screens inside termination fitting is to avoid debris and/or small animals from entering vent.

Primer shall be used when installing System 636® and other PVC/CPVC products at temperatures below 32
O
(0 C).

Primer is required in some jurisdictions regardless of temperature, verify with your local authority having
jurisdiction.

Use only System 636 cements and primers; substituting other cements and primers will void IPEX's certification
and warranty; (see OEM's literature).

For Schedule 40 PVC/CPVC any glue and primer approved by your local authority having jurisdiction may be
Product
Description
(3 Inch) PVC/CPVC- FGV
Concentric Vent
(4 Inch) Kit w/ vent screen
196985
(3 Inch)
Low Profile
196986
Termination Kit
(4 Inch)
3" and 4" SCH 40
(Solid Core) PVC/
CPVC TEE w/
ULC-S636
vent screen
3" and 4" SCH 40
(Solid Core) PVC/
CPVC 90° EL w/
ULC-S636
vent screen
3" and 4" SCH 40
(Solid Core) PVC/
CPVC 45° EL w/
ULC-S636
vent screen
196051
(3 Inch) Friction fit vent
196052 screen (3" and 4")
(4 Inch)
3" and 4" SCH 40
(Solid Core) PVC/
CPVC Snorkel
ULC-S636 vent w/ vent
screen
Diagram
24
Equivalent
Length (Ft.)
20
5
5
5
2.5
0
10
O
F