Front Panel LEDs and Tape Eject
SDLT 600A
Figure 3 SDLT 600A Front
Panel Display
Quantum A-Series Tape Drives User's Guide
All LEDs are on the front panel of the A-Series tape drives along with the
manual tape cartridge eject button. Use these LEDs to monitor the activity
of your A-Series tape drive as necessary.
•
SDLT 600A
•
LTO-3A
As shown in
figure
3
three LED indicators that reflect the operating condition of the drive:
The left LED is dual color (green/orange). This LED is the density
indicator. When you insert a Super DLTtape II data cartridge, this LED
illuminates green.
Table 3
describes control and LED functionality.
3, the SDLT 600A tape drive front panel display has
Chapter 3 Using Your Tape Drive
Front Panel LEDs and Tape Eject
Green/Orange LED
(Cartridge Status)
Green LED
(Drive Status)
Yellow LED
(Cleaning Required)
Eject Button
iTalk Port
13