Warranty Note; Safety, Handling, And Esd Protection; Safety Precautions - Quantum Tape Drive A-Series User Manual

A-series tape drives
Hide thumbs Also See for Tape Drive A-Series:
Table of Contents

Advertisement

Warranty Note

Safety, Handling, and ESD Protection

Safety Precautions

Quantum A-Series Tape Drives User's Guide
See the warranty before installing your tape drive. Certain actions taken
during installation could void the warranty if not properly conducted.
Generally, the Limited Product and Limited Repair Warranties are
contingent upon proper use in the application for which the product is
intended; and do not cover the product if you perform any of the
following actions:
• Modify the product without the manufacturer's written approval.
• Subject the product to unusual physical, environmental, or electrical
stress, including damage caused by handling or shipping in
unapproved containers or packaging.
• Disturb any warranty labels, or the integrity of the product in any
other way.
• Remove or damage the serial number label to the extent that
warranty status of the product cannot be determined.
Inappropriate or careless handling of the A-Series tape drives may result
in damage to the product. Follow the precautions and directions to
prevent damaging the tape drive.
For your safety, follow all safety procedures described here and in other
2
sections of the manual.
1 Power off the system before installing or removing the tape drive to
prevent the possibility of electrical shock or damage to the tape drive.
Unplug the unit that contains—or is to contain—the tape drive from
AC power to provide an added measure of safety.
2 Read, understand, and observe all label warnings.
Chapter 2 Getting Started
Warranty Note
9

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sdlt 600aLto-3a

Table of Contents