Quantum Tape Drive A-Series User Manual page 31

LED/Button/
Port Title
Cleaning
Required LED
Eject Button
Infrared
Communication
Port
Whenever the tape drive resets, all LEDs illuminate briefly and then illuminate in sequence
Note:
until the reset completes. Whenever the tape drive encounters an error, all LEDs flash together.
Quantum A-Series Tape Drives User's Guide
Color/
Symbol Action
Yellow On
!
Off
Press
Explanation
Cleaning is required. See
Mechanism for cleaning information.
Cleaning is not required.
Use the button to eject the tape data cartridge
Eject
from the tape drive. When you press the button, the
tape drive completes any active writing of data to the
tape, then ejects the data cartridge.
Note: A tape cartridge can be unloaded during an
active FTP session only by using the built-in FTP
client. Right-click within the right pane of the FTP
client window to display the
click .
Eject tape
See the applicable data cartridge appendix for detailed
data cartridge handling procedures.
This infrared port, also known as iTalk, provides a
wireless remote testing base for customers and
integrators to access system diagnostic information.
See your Quantum sales representative for more
information.
Chapter 3 Using Your Tape Drive
Front Panel LEDs and Tape Eject
Cleaning the Tape
menu, then
Contextual
15