Cbysxx + Cbycxxlb/Cbycxxhb - Stack-On Bookcase With Credenza - Global CBYCTxxxxHxx Installation Manual

CBYS & CBYC LB/CBYC
xx xx
NOTE: Open and assemble only one product at
a time to avoid a potential mix-up of parts and
hardware. It is advisable to assemble the unit on
a clean padded surface to avoid scratches.
CAUTION: Do not drag the assembled furniture
across the floor. Lift the unit completely off the
floor, and move it to the desired location.
ASSEMBLY
STEP 1: Clean the top surface of the credenza with a damp cloth, followed by a
soft dry cloth in the direction of grain.
STEP 3: Apply double sided adhesive tape to the bottom edges of stack-on
bookcase
STEP 5: Apply moderate pressure from top of the stack-on bookcase for at least
a minute so that double sided adhesive tape sticks firmly.
STEP 7: The units are secured.
globalfurnituregroup.com
HB - STACK-ON BOOKCASE WITH CREDENZA
xx
Required tools
Safety glasses Bit #2 Robertson
Included hardware
L-bracket (Optional) Robertson PH screw (Optional)
Qty. 2 #8 x 5/8, Qty. 8
CORBY INSTALLATION GUIDE
Measuring tape Cordless screwdriver
Double sided adhesive tape
Qty. 1
STEP 2: Place the stack-on bookcase flat on a clean padded surface.
STEP 4: Align the stack-on bookcase on the credenza in any desired corner.
Front view
STEP 6: [OPTIONAL] Additional support may be added by installing
L-brackets along the outside back of the assembled units with
supplied screws (#8 x 5/8) . These L-brackets and screws are
sold separately.
Side view
6