Cbycmpwxxhxx - Modesty Panel - Global CBYCTxxxxHxx Installation Manual

CORBY INSTALLATION GUIDE
CBYCMPW H - MODESTY PANEL
xx xx
NOTE: Open and assemble only one product
at a time to avoid a potential mix-up of parts
and hardware.
It is advisable to assemble the unit on a clean
padded surface to avoid scratches.
CAUTION: Do not drag the assembled
furniture across the floor. Lift the unit com-
pletely off the floor, and move it to the desired
location.
ASSEMBLY
(
Only freestanding wOrk table shOwn fOr demOnstratiOn
STEP 1: Place the modesty panel flat on a clean padded surface. Attach
brackets to the modesty panel with provided screws. (#8 x 5/8", Qty. 6)
(Pilot holes on modesty panel indicate the location).
STEP 3: Place the assembled modesty panel on the bottom surface of the table.
Align the modesty panel 6" inset from the top edge and equal the
spacing sideways. Drill pilot holes through the bracket using the drill
machine.
=
BOTTOM VIEW
STEP 5: Flip the assembled table upright. Adjust the glides to level the
worksurface.
3
Required tools
Safety glasses Measuring tape
Bit #2 Robertson Drill bit #3
Included hardware
Modesty panel bracket Robertson PH screw
Qty. 1 set #8 x 1", Qty. 6
LH RH
=
6" inset
Screwdriver #2 Robertson
Fluid leveler
Robertson PH screw
#8 x 5/8", Qty. 6
)
STEP 2: Place the assembled table upside down on a clean padded
surface.
STEP 4: Insert screws (#8 x 1", Qty. 6) through the brackets into the
bottom surface of the table.
Cordless drill
globalfurnituregroup.com