Cbyctxxxxhxx - Occasional Table; Cbyrxx32 - Peninsula Table; Cbyrtxxxx - Freestanding Work Table - Global CBYCTxxxxHxx Installation Manual
Corby collection: occasional table,peninsula table,freestanding work table,modesty panel,peninsula table with low base (lb) pedestal 32 inch d,peninsula table with high base (hb) pedestal 32 inch d,stack-on bookcase with credenza
Advertisement
CBYCT
H
- OCCASIONAL TABLE / CBYR
xxxx
xx
TABLE
CBYCTxxxxHxx - Occasional table
NOTE: Open and assemble only one product at
a time to avoid a potential mix-up of parts and
hardware.
It is advisable to assemble the unit on a clean
padded surface to avoid scratches.
CAUTION: Do not drag the assembled furniture
across the floor. Lift the unit completely off the
floor, and move it to the desired location.
ASSEMBLY
(
Only freestanding wOrk table shOwn fOr demOnstratiOn
STEP 1: Place the worksurface upside down on a clean padded surface. Make
sure the inserts are preinstalled.
STEP 3: Flip the assembled table upright. Adjust the glides to level the
worksurface.
globalfurnituregroup.com
32 - PENINSULA TABLE / CBYRT
xx
CBYRxx32 - Peninsula table
Required tools
Safety glasses
Bit #2 Robertson
Included hardware
Metal inserts (Preinstalled)
1/4-20 x 20, Qty. 24
Glides (Preinstalled)
Qty. 4
CORBY INSTALLATION GUIDE
- FREESTANDING WORK
xxxx
CBYRTxxxx - Freestanding work table
Screwdriver #2 Robertson
Cordless drill
Countersunk FH screw
1/4-20 x 3/4, Qty. 20
Leg bracket (Preinstalled)
Qty. 4
)
STEP 2: Position the preassembled legs to align the holes in the bracket
with the preinstalled inserts in the worksurface. Secure each
bracket to the worksurface with the five (5) supplied countersunk-
FH screws (1/4-20 x 3/4).
NOTE: For Peninsula table attach only 2 legs.
Fluid leveler
Lag screw (Preinstalled)
3/8 x 3
, Qty. 8
1/2
2
Advertisement
