iDect X2i System User Manual page 42

Operational notes continue...
Interference
If the sound quality gets worse as you move around while on a call, this is probably
due to interference between the Handset and the Base unit, perhaps because you
are too near to another phone or other electrical equipment. Move to a different
position to clear the interference. If you do not move, your call may be cut off.
Radio interference in the environment may occasionally cause a short break in the
link between the Handset and the Base unit while you are on a call. The Handset's
display will flash briefly, while the unit automatically changes to a different channel
to restore the link.
Keeping the batteries charged
When you don't need to carry your Handsets around (for example, at night), leave
them on the Base unit or charger pod, to keep the batteries charged.
Whenever the battery charge level symbol on the display shows 'nearly empty',
replace the Handset on the Base unit or charger pod.
Cleaning and care
Don't clean any part of your
chemicals - this may cause permanent damage which is not covered by the
Guarantee. When necessary, clean it with a damp cloth.
Keep your iDECT X2i away from
don't let it get wet.
and
Every effort has been made to ensure high standards of reliability for your
iDECT X2i. However, if something does go wrong, please
repair it yourself - consult your supplier or the Binatone Help Line.
iDECT X2i wi th be nzene , thinner or other solvent
hot, humid conditions or strong sunlight,
do not try to
33