iDect X2i System User Manual page 24

Customizing your Phone continue...
Alarm setting
1
2
3
4
5
6
7
8
9
10
Dial mode
1
setting
2
3
4
5
6
Flash time 1
setting
2
This feature allows you to set an alarm time for your Handset.
Press soft button to access handset menu
Menu
Press soft button
Select
display shows highlighted.
MELODY
until ALARM
Press DOWN button
Press soft button
Select
display shows
by default, or toggle to show
ON
Press soft button to confirm
ON
display shows by default.
HOUR 12AM
Key in digits from 01 to 12
Toggle UP/DOWN key to select
Press soft button to confirm
OK
display shows by default.
MINUTE 00
Key in digits from 0 to 0 59
Press soft button to confirm
OK
You can set the alarm melody ringer under MELODY
sub-menu. When activated, the Handset will ring
for 30 seconds.
To stop the alarm, press any button on the Handset.
Note: Once activated, the alarm will only ring
once. You must repeat setting the alarm if you
want to be alerted on the following day.
Press soft button
Menu
display shows highlighted
HANDSET
P ress Down button until
BASE
Press soft button
Select
display shows
DIAL MODE
Press soft button
Select to confirm
display shows
TONE highlighted
Press soft button
to confirm
Select
Repeat the steps above for Pulse mode setting.
Note: When dialing in Pulse mode, press */RING
button once to temporarily switch to the tone mode
dialing. It will return to the pulse mode once the
Handset goes on hook (Temporary tone dialing feature).
Press soft button
Menu
display shows highlighted
HANDSET
P ress Down button until
BASE
1 5
is highlighted
OFF
or
AM PM
the setting.
option is highlighted
highlighted
the setting.
option is highlighted