iDect X2i System User Manual page 27

Phonebook function continue...
Storing a pause
in a number
To edit a 1
Phonebook
record
2
3
4
5
6
7
8
9
Notes:
If there are no memory locations left in the
Phonebook, the LCD screen will display
To continue with memory programming, you must
delete or edit existing Phonebook records.
If you mis-type entering the name or phone
number, press soft button
DELETE
last character or digit entry. Press and hold soft
button DELETE to delete all the name or number
entry .
Some internal switchboards may require you to dial
a number to get an outside line. It may take a few
seconds to connect, requiring a pause in the
dialing sequence.
In the number entry mode, press and hold PAUSE
button for 3 seconds to make a pause.
It will be displayed as P on the LCD screen.
Note: The default pause time is 3 seconds.
Press soft button
Name
display shows highlighted
EMERGENCY
Press DOWN button until
EDIT
Press soft button
Select
The phonebook entry will be displayed in
alphanumeric order(or the display will show
if there is no record stored).
Press UP or DOWN button to search for the entry
which you wish to edit.
Press soft button
OK
display shows name entry.
Press soft button DELETE to delete unwanted
characters then key in desired characters via keyboard.
Press soft button
OK
display shows number entry.
Repeat step 6 to edit the number.
Press soft button to confirm.
OK
18
MEM FULL
to delete the
option is highlighted.
EMPTY