GE D30 Instruction Manual page 131
Line distance protection system
Hide thumbs
Also See for D30:
- Instruction manual (685 pages) ,
- Communications manual (532 pages) ,
- Instruction manual (486 pages)
Table of Contents
Advertisement
CHAPTER 4: INTERFACES
Figure 4-5: Settings template with two settings specified as editable
5.
Click the Save button to save changes to the settings template.
6.
Continue through any other settings window to specify all viewable settings.
The next time that the device/settings are accessed, only those specified as viewable/editable display in the menu
hierarchy.
4.1.7.3 Add password protection to a template
GE recommends that templates be saved with password protection to maximize security.
When templates are created for online settings, the password is added during the initial template creation step. It
does not need to be added after the template is created.
To add password protection to a settings file template:
1.
In the Offline Window area, right-click the device and select the Template Mode > Password Protect Template
option.
The software prompts for a template password. This password must be at least four characters in length.
2.
Enter and re-enter the new password, then click OK to continue.
The settings file template is now secured with password protection.
4.1.7.4 View the settings template
Once all necessary settings are specified for viewing, users are able to view the settings template on the online device or
settings file. There are two ways to specify the settings view with the settings template feature:
•
Display only those settings available for editing
•
Display all settings, with settings not available for editing greyed-out
To display only the settings available for editing:
1.
Right-click the device in the Online or Offline Window area and apply the template by selecting the Template Mode >
D30 LINE DISTANCE PROTECTION SYSTEM – INSTRUCTION MANUAL
ENERVISTA SOFTWARE INTERFACE
4
4-7
Advertisement
Table of Contents
