Setup Menu Operations - JVC UX-G60 Instructions Manual

Remote Control
, , ,
SET UP
LANGUAGE menu
Item
MENU LANGUAGE
AUDIO LANGUAGE
SUBTITLE
ON SCREEN LANGUAGE
PICTURE menu
Item
MONITOR TYPE
16:9 4:3 LB
4:3 PS
PICTURE SOURCE
SCREEN SAVER
FILE TYPE
31

Setup Menu Operations

ENTER/SET
You can select the initial menu language of the DVD Video.
You can select the initial audio language of the DVD Video.
You can select the initial subtitle language of the DVD Video.
You can select "ENGLISH," "FRENCH," "GERMAN," "CZECH," "SLOVAK," "POLISH" or
"HUNGARIAN" as the on-screen language.
You can select the monitor type to match your TV when you play back DVD Video discs recorded for
wide-screen televisions.
16:9 (Wide television screen): For a wide-screen (16:9) TV.
4:3 LB (Letter Box conversion): For a conventional (4:3) TV. Displays a wide-screen picture to fit
the width of the TV screen keeping the aspect ratio.
4:3 PS (Pan Scan conversion): For a conventional (4:3) TV. The picture is zoomed in to fill the screen
vertically and the left and right sides of the picture are cut off.
You can obtain optimal picture quality by selecting the source type of the disc contents.
AUTO: Normally, select this option. The System recognizes the picture type (film or video source) of
the current disc according to the disc information.
FILM: For a film source disc.
VIDEO: For a video source disc.
You can set the screen saver function to ON or OFF. If no operation is done for about 5 minutes, the
display dims.
You can select the file type to play.
AUDIO: To play MP3/WMA files.
STILL PICTURE: To play JPEG files.
VIDEO: To play MPEG-1, MPEG-2, ASF and DivX files.
INFO
Initial settings Remote
ONLY
The Setup Menu cannot be activated during playback.
1
Press SET UP.
LANGUAGE
MENU LANGUAGE
ENGLISH
AUDIO LANGUAGE
ENGLISH
SUBTITLE
ENGLISH
ON SCREEN LANGUAGE ENGLISH
2
Press (or )to select the menu.
3
Press (or ) to move to select the item.
4
Press ENTER/SET.
5
Press (or ) to select the options, then press
ENTER/SET.
• For settings of the LANGUAGE menu, see also
"Language Code List" on page 37.
To remove a preference display
Press SET UP.
Contents
Contents