Kärcher NT 611 Eco M Operating Instructions Manual page 15

English
Filter cleaner
Power Filter Clean
Your vacuum cleaner is provided
with a new type of filter cleaner –
especially effective for fine dust.
The flat pleated filter is automatically
cleaned (pulsing sound) by an air
blast if you press the remote control
at the hand grip for several seconds.
NT 611 Eco M
Switching on the Power Filter
Clean
Slide setting (1) - downwards
♦ Use the Power Filter Clean at
regular intervals, both during and
after completion of the vacuuming
operation. The dust-producing
machine must be switched off
whilst the filter is cleaned.
Wet-vacuuming
Fitting rubber squeegees
Fit the rubber squeegees
Note:
The profiled surface of the rubber
squeegees must be on the outside.
Remove the paper filter bag
Plug in the power plug
Switch on the machine and start
using it
♦ The flat pleated filter must
never be removed when
vacuuming.
♦ The paper filter bag or the
membrane filter (special
accessories) must be removed
whenever vacuuming wet dirt.
♦ In the case of non-conductive
fluids (e. g. drilling emulsions,
oils and greases), the unit is not
switched off when the container
is full. The fill level must be
regularly checked and the
container emptied before it is
too full.
Switching off the Power Filter
Clean
Setting of the slide (1) - upwards.
Note:
♦ When vacuuming wet dirt with the
upholstery or the crevice nozzle,
or if predominantly water is to be
vacuumed out of a container, it is
advisable to turn the - Power Filter
Clean – operation off.
♦ The unit turns itself off
automatically when the max. liquid
level has been reached.
♦ Switch the unit off and empty the
container.
♦ Clean and dry the flat pleated filter
and the electrodes as well as the
container after finishing wet
vacuuming jobs.
15