Setting The Squelch Level - Oricom DTX4200 Operating Instructions Manual

Setting the Squelch Level

1. Press channel selector 2 times. The current
squelch level is displayed.
2. Select the squelch level by rotating the
channel selector.
1 - Max sensitivity (Min. squelch)
15 - Min. sensitivity (Max/Tight squelch)
Off - Open squelch
Setting SRX (Sub Receiver) Volume
1. Press channel selector 3 times, then "SVL" is displayed.
2. Rotate the channel selector to adjust the SRX volume.
Note :
* If a button is not pressed within 2 seconds the radio will
automatically exit the sub display of "VOL" "CH" "SQL" and "SVL".
PTT (Push-To-Talk) button
Pressing the PTT button activates the transmitter.
The RF (radio frequency) level will appear on the LCD display as you are
transmitting.
To receive, release the PTT button, TX will disappear on the LCD
display.
When transmitting, hold the Mic two inches (5cm) from your mouth
and speak clearly in a normal voice across the front of the Mic area.
Operations
SWP
SCAN
SRX
RM
MR
MENU
MW
GTS
13