Oricom DTX4200 Operating Instructions Manual page 10

Controls and Indicators
LCD Icons & Indicators
1 2
10
1. Sub receiver busy
2. Sub receiver on
3. Main receiver busy
4. Duplex on
5. Signal strength & TX power
Installation of the DTX4200 and fitting optional accessories
Mounting the UHF radio
The universal mounting bracket supplied with your UHF radio allows
overhead/dash mounting.
Mount the UHF radio via the bracket, securely with the supplied screws in
the desired location, ensuring the surface is sturdy and can support the
weight of the radio.
TO MOUNT: SLIDE
INTO UNIVERSAL
MOUNTING BRACKET
10
3 4 5
8
9
6. Group display (A, B, C groups)
7. Group address channel
8. Status display
9. CTCSS or DCS on
10. Channel display
6
7
TO REMOVE:
SLIDE OUT HOLDING
BRACKETS AWAY FROM
UHF RADIO