Setting The Squelch Level - Oricom DTX4000 Operating Instructions Manual

Setting the Squelch Level

1. Press channel selector 2 times. The current squelch level is
displayed.
2. Select the squelch level by rotating the channel selector.
1 - Max sensitivity (Min. squelch)
15 - Min. sensitivity (Max/Tight squelch)
Off - Open squelch
CH
S Q
Setting SRX (Sub Receiver) Volume
1. Press Channel selector 3 times "SVL" is displayed.
2. Rotate the Channel selector to adjust the SRX volume.
Note :
* If a button is not pressed within 2 seconds the radio will
automatically exit the sub display of "VOL" "CH" "SQL" and "SVL".
PTT (Push-To-Talk) button
Pressing the PTT button activates the transmitter.
The RF (radio frequency) level will appear on the LCD as you are
transmitting.
To receive, release the PTT button and then TX will disappear on the
display.
When transmitting, hold the Mic two inches from your mouth and speak
clearly in a normal voice across the front of the Mic area.
SCAN
RM
MR
MW
Operations
SWP
SRX
MENU
GTS
13