Acer Aspire X1301 Service Manual page 33

Power Management Setup (Eup)
Parameter
ACPI function
ACPI Suspend Type
Power Management
Video Off Method
HDD Power Down
HDD Down in Suspend
Soft-Off by PBTN
PowerOn After Pwr-Fail
WOL (PME#)/From Soft-Off
S5 Resume by USB
Power-On by Alarm
Day of Month Alarm
Time (hh:mm:ss) Alarm
HPET Support
PS2 KB Wakeup
PS2 Mouse Wakeup
Chapter 2
Description
Enables or disables the Advanced Configuration and Power
Management (ACPI) function.
Select an ACPI state.
Select a power saving method for the following modes:
• HDD power down
• Suspend mode
Determines the manner when the monitor goes blank.
Set a time when the hard disk drives will power down after a period
inactivity.
Enables or disables the HDD power down function in suspend mode.
Determines the behavior of system power button.
Set the system to automatically start itself up after a power failure.
Enables or disables to wake up the system from a power saving mode
through an event on a LAN device or using soft-off.
If enabled, press any key or click the mouse will wake system from S1/
S3 state.
Enables or disables to boot the system on scheduled date/time.
This parameter can be configured if the Power-On by Alarm is set to enable.
Enables or disables the High Precision Event Timer (HPET) function.
Enables or disables to wake up the system from a power saving mode
using a PS2 keyboard.
Enables or disables to wake up the system from a power saving mode
using a PS2 mouse.
Option
Enabled
Disabled
S1 & S3
S1 (POS)
S3 (STR)
User Define
Min. Saving
Max Saving
DPMS Support
Blank Screen
V/H Sync + Blank
Disabled
1 to 14 Min
Disabled
Enabled
Instant-Off
Delay 4 Sec
Off
On
Former-Sts
Disabled
Enabled
Disabled
Enabled
Disabled
Enabled
Enabled
Disabled
Disabled
Enabled
Disabled
Enabled
25