Yaesu FT-818ND Operating Manual page 56

Menu Operation
Menu Item 01 [144 ARS]
Function: Activate/deactivate the Automatic Repeater Shift when operating on the 144
MHz band.
Available Values: OFF/ON
Default: ON (depending on transceiver version)
Menu Item 02 [430 ARS]
Function: Activate/deactivate the Automatic Repeater Shift when operating on the 430
MHz band.
Available Values: OFF/ON
Default: ON (depending on transceiver version)
Menu Item 03 [9600 MIC]
Function: Adjust the audio input level from the TNC during 9600 bps Packet operation.
Available Values: 0 ~ 100
Default: 50
Menu Item 04 [AM&FM DL]
Function: Enabling/disabling the
knob on the AM and FM modes.
Available Values: ENABLE/DISABLE
Default: DISABLE
Menu Item 05 [AM MIC]
Function: Adjust the microphone gain level for the AM mode.
Available Values: 0 ~ 100
Default: 50
Menu Item 06 [AM STEP]
Function: Select the tuning steps for the knob on the AM mode.
Available Values: 2.5/5/9/10/12.5/25kHz
Default: 5 kHz (depending on transceiver version)
Menu Item 07 [ANTENNA]
Function: Select the antenna connector to be used on each operating band (HF/50/144/430
MHz).
Available Values: FRONT/REAR
Default: HF: REAR, 50/144/430 MHz: FRONT
When select the REAR antenna connector, the "R" icon will appear on the display
Menu Item 08 [APO TIME]
Function: Select the Auto Power Off time (time before power goes off).
Available Values: OFF/1h ~ 6h
Default: OFF
54