Preparation - Bosch OptiMUM MUM9 Series Instruction Manual

■ Place the base unit on a smooth, clean
and stable surface.
■ Pull the power cord out to the required
length.
■ Press the release button and raise
the swivel arm to the stop.
■ Place the cover with the filling shaft at
the front on the main drive.
■ Insert the bowl. When doing so, use the
recesses on the base unit.
■ Turn the bowl anticlockwise until it locks
into place.
The base unit is prepared for further use.
Do not slide the appliance about
on the work surface as this may impair
the functioning of the scales. To move the
appliance, lift it.
■ Press the release button and push the
swivel arm down until it locks into place.
■ Plug the mains plug into the mains.
The appliance is switched on.
■ appears on the display.
If the appliance is not used or
operated within a certain period, the display
will slowly fade and switch to standby
mode. will appear once again
when any button is touched.
■ Press and hold buttons A and + at the
same time until the configuration menu
is opened.
■ Release buttons A and + again.
■ The following settings appear in
sequence each time button A is briefly
pressed:
Language in which the display texts are
displayed.
Volume of the acoustic signals – setting
in 6 levels from off to loud.
Brightness of the display – setting in
6 levels from dark to bright.
(for models with scales)
Unit of display for the scales – grams ( )
or pounds ( ).
■ The current setting is changed using the
button + or -.
■ Press and hold buttons A and +
simultaneously until
briefly appears on the display.
■ Release buttons A and + again.
The changed settings are saved.
X see also quick reference guide
■ Press and hold buttons A and + at the
same time until the configuration menu
is opened.
■ Release buttons A and + again.
■ Keep pressing button A until the
language selection appears.
■ Press the button + or - repeatedly
until the desired language is displayed.
■ Press and hold buttons A and +
simultaneously until
briefly appears on the display.
■ The language selection is shown on the
display.
■ Release buttons A and + again.
The language selection is saved.
■ Hold down one of the function buttons
(D/A/C) until
the display. The appliance is ready to
use.
If the appliance is switched on
with the rotary switch, the menu is exited
immediately.

Preparation

appears on
9