Using The Scales - Bosch OptiMUM MUM9 Series Instruction Manual

Turn the rotary switch to y to cancel
SensorControl Plus. A slight resistance
must be overcome for this.
If the result is not how you wish it to be,
turn the rotary switch to setting (for
cream and beaten egg white) or setting
(for yeast dough) and continue to
process the ingredients until the desired
consistency is achieved.
Do not start SensorControl Plus a
second time with ingredients which have
already been processed.
X I m age sequence
1. Prepare the base unit and insert the
professional stirring whisk.
Press the release button and push the
swivel arm down until it locks into place.
Plug the mains plug into the mains.
appears on the display.
Separate the eggs (2-12 eggs).
Press button D.
the display.
Models without a scale display
"CREAM > 300 ml". Press button D
again. "CREAM > 700 ml" appears on the
display.
Press button D.
on the display.
If appliances feature integrated
scales, these are now calibrated. Individual
dashes appear in succession on the display
during calibration: "– – – – –" (tare). "0 g" or
"0.00 lb" appears on the display (depending
on the setting).
Add the egg white to the bowl.
appears on the display.
Turn the rotary switch to ü and hold
in this position for 2 seconds.
After 2 seconds the rotary switch is
automatically fixed in this position and
remains on ü after being released.
If the rotary switch does not
remain on ü, it was not held for long
enough in this position.
J
appears on
appears
on the display. SensorControl Plus
monitors the processing.
Once the pre-programmed consistency
has been achieved, an acoustic signal
will sound and processing will stop.
appears on the display.
Setting the acoustic signal
X "S e ttings" see page 9
The rotary switch automatically switches
1 2 .
to y.
display.
Disconnect the mains plug.
Processing with the
function is ended.
Clean all parts immediately after use.
X "C l eaning and maintenance" see
page 1 5
U s ing the scales
Depending on the model in question, the
appliance may be equipped with scales.
The following applications are possible:
Weighing the added ingredients
(either each ingredient individually or all
ingredients together).
Pre-setting a desired weight and
counting down until sufficient ingredients
have been added (with audible
information signals).
The scales display the weight in 5 g
steps (0.01 lb). If less than 5 grams
(0.01 lb) are added, the scales will not
provide correct measurement results.
The appliance has 4 weight sensors
in the feet. The scales only supply
the correct results if all of the feet are
standing on a solid and level surface.
Do not put any cloths or other items
underneath.
The worktop must not be subject to any
vibrations while the scales are being
used (e.g. by other activities or other
appliances).
Using the scales
appears
appears on the
13