Air Filter Cleaning; Cooling Fluid Level - PIAGGIO Beverly Tourer 300ie User Manual

Air filter cleaning (03_12)

1. Wash the sponge with water and mild soap.
2. Dry it with a clean cloth and short blasts of compressed air.
3. Impregnate the sponge with a mixture of 50% petrol and 50% specified oil.
4. Gently squeeze the filtering element, let it drip dry and then refit it.
CAUTION
03_12
IF THE VEHICLE IS USED ON DUSTY ROADS, IT IS NECESSARY TO SERVICE
THE AIR FILTER MORE OFTEN TO AVOID DAMAGING THE ENGINE.
Recommended products
AGIP FILTER OIL
Oil for air filter sponge
Mineral oil with specific additives for increased adhesiveness

Cooling fluid level (03_13, 03_14, 03_15, 03_16)

Engine cooling is carried out by a forced-circulation coolant system. The coolant con-
sists of a mixture 50% de-ionised water and 50% glycol ethylene-based antifreeze
solution with corrosion inhibitors. The coolant supplied with the scooter is already
mixed and ready for use.
For proper engine functioning, make sure that the temperature of the coolant remains
in the middle zone of the corresponding gauge. If the needle of the gauge enters the
red zone, stop the engine, let it cool down and check the coolant level; if the level is
OK, contact an Authorised Service Centre.
03_13
Check coolant when the engine is cold and as indicated in the scheduled maintenance
tables, following the steps below.
47