Automatic Transmission; Safe Driving - PIAGGIO Beverly Tourer 300ie User Manual

Hide thumbs Also See for Beverly Tourer 300ie:
Table of Contents

Advertisement

Automatic transmission (02_12)

To ensure simple, pleasurable riding, the vehicle is equipped with automatic trans-
mission with regulator and centrifugal clutch. The system is designed to provide the
best performance (acceleration and consumption) while riding on both flat roads and
uphill.
If you have to stop on an uphill slope (traffic lights, traffic jam, etc.) use only the brake
to keep the vehicle still, leaving the engine running at idle speed. Using the
engine to keep the vehicle still can cause the clutch to overheat, due to the
friction of the clutch mechanism itself against the clutch bell.
02_12
It is therefore recommended to avoid conditions of prolonged clutch slippage (other
than those previously indicated) like driving uphill fully laden on steep slopes or starting
off with driver and passenger at slopes greater than 25%.
Observe the following precautions if the clutch overheats:
1.Do not continue riding in such conditions.
2. Let the clutch cool down with the engine at idle speed for a few minutes.

Safe driving (02_13)

Some simple tips are provided below that will enable you to use your vehicle on a daily
basis, confidently and safely. Your skill and your mechanical knowledge are the basis
of safe riding. We recommend trying out the vehicle in traffic-free zones in order to
acquire a good knowledge of the vehicle it self.
1. Before riding off, remember to put on your helmet and fasten it correctly.
2.Reduce speed on rough roads and ride with care.
3. After riding on a long stretch of wet road without using the brakes, braking can be
02_13
poor at the beginning. Under these conditions, it is a good idea to operate the brakes
from time to time.
4. Do not brake hard on wet, dirt or slippery road surfaces.
34

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents