Table of Contents
Advertisement
Time Settings
The Time settings page allows you to view and configure the time source, current time, and
time zone for the STB. You can also configure Network Time Protocol (NTP) support to
synchronize the STB clock with the selected time zone.
IMPORTANT
date and time must be set before the Electronic Program Guide (EPG) will work.
To specify the Time settings:
Using the remote control, press the Down Arrow to scroll down to
1.
•
To set up the device local system time, you need to input Date and Time numbers
(as shown above).
•
To use network time, you need to provide an NTP address (as shown below).
Mantaray Administrator's Guide, v1.0.3, Issue 01
Mantaray
By default the
's date and time is 1 Jan 1970. The correct
Initial Setup
Configuring Mantaray
.
Time
31
Hide quick links:
Advertisement
Table of Contents
