Table of Contents
Advertisement
LCD WITH BUILT-IN DVR USER MANUAL
Chapter 3 System Operating Manual
3. 1 Instructions for front panel and
3.1.1 Front Panel
Buttons on front panel and their functions:
① Indicating light area
NET：Indicating light for network
When network connection is ok, it displays green, and when data is transferring it flashes.
ALARM：Indicating light for alarm
The alarm light will be on once the alarm is started（ no matter what kind of alarm it is for）
H.D. ：Indicating light for Hard Disk
The light
turns on
when Hard Disk reads and writes the data.
POWER ：Indicating light for power
The power is on if the light turns red；
②
Buttons area
Menu operating buttons
：
UP Directional button;
：
Down Directional button;
：
Left Directional button;
：
R
ight Directional button
【 】button：
for confirmation,choosing the menu items, and press this button to enter into
the selected sub-menu；Pressing this button can display the real time of the system
when
playing back the recording;
Functional Buttons Area
【 】Button：
Main Menu, used for setting each parameters of the system.
【 】Button：
Play the existing recording on the hard drive;
【 】Button：
Checking the menu buttons, used for checking recorded information on the hard disc;
【 】Button：
Exit button，exit from the current operating menu to last selected menu；
【 】
Button:
Recording button,four channels manual recording can be started at the same time
when the screen is
when the screen is under two channels surveillance state; Single channel Manual
recording can be started when the monitor is under single channel surveillance state
【
】Button：
For stopping the recording button and the
【
】Button：
Fast
Rewind button, at speed of
【
】Button：
fast forward button，Play fast forward of the recorded picture at speed of
and
×
4 times；
【
】Button：
Press this button continuously to see the picture frame by frame
【
】Button：
Used for switching
in the following order
Channel 1 Channel 2
Channel 2)
Dual Views (Channel 3- Channel 4)
PDF created with pdfFactory trial version
remote
control unit
POWER
H.D.
ALA RM
NET
IR
in built-in quad mode
, dual views manual recording can be started
manual
recording；
×
2 and
×
4 times；
between
built-in quad, dual and single picture
:
Channel 3
Channel 4
Dual Views (Channel 1-
Built-in quad
-e7-
www.pdffactory.com
LCD WITH BUILT-IN DVR USER MANUAL
3.3.6 Net Parameter
Move the
See picture below:
a).
IP address: Press enter or manually type numbers
b).
Sub-net Mask:
number directly, set host IP address correctly according to host local LAN
c).
Default Gateway:
Bandwith:
d).
3.3.7 System Information
Moving cursor over [System information] and pressing [ENTER] key enter into system
information setting interface.
3.3.8 Basic parameter
Moving cursor to [Basic parameter] item (bottom color of character change to white means being
selected) and pressing [ENTER] key enter to this item selection setting interface:
After entering into sub-menu, move cursor up and down to scroll through the sub
menu.
Video recording parameter setting: Moving cursor upon this item and pressing [ENTER] key takes
you to the corresponding interface.
Image quality: Divided into "1-8" different parameters. Press [Enter] to change this parameter
The smaller the digit, the better the image quality.
Frames per second: When system has been set to PAL format, it can divide into "25、12、06" three
ranks, when system has been set to NTSC format, it can divide into "30、15、08、"three ranks.
Moving cursor upon this item and pressing [ENTER] key will change its parameter.
×
2
Format: Moving cursor upon this item and pressing [ENTER] key can switch system's video record
coding format: VBR、CBR.
;
VBR:
Denotes changeable code flow's coding format, this coding format shows, image quality is
mode
；
invariable, but data code flow's size can change according to moving object's scale inside, the larger
the moving object occupied in image's scale, the larger the code flow.
Channel1
cursor
to the net parameter and press enter to get into the system's net interface setting.
on the
Moving cursor upon this selection item and pressing [ENTER] key or input
setting according to IP address
This feature can be used to set the speed of transfer of data over the network
(need screen shot)
Basic Settings
Record Settings:
Buiz Settings:
Language Settings:
Fastigium Settings:
Recordbag Settings:
USB Settings:
Video Spot Settings:
-e16-
IP address line.
Setup
Close
English
Open
30 minute
Setup
05 Second
Advertisement
Table of Contents
