Q-See Q25DVR4ES User's Manual Q-SEE Product Warranty Thank you for choosing our products. All of our products users have a conditional free warranty repair service for hardware within 12 months starting from purchase date, and a free exchange service within one month (valid for manufacturing defects).
Q-See Q25DVR4ES User's Manual Camera Specifications Page 23 Q-See Q25DVR4ES User's Manual Chapter 2: Layout - 2.2 Rear Panel 1. 1 x BNC VIDEO OUTPUT 2. FAN 3. 4 X BNC VIDEO INPUT 4. 12V DC POWER SUPPLY 5. USB 2.0 PORT Chapter 2: Layout-2.3 Remote Control...
CAUTION: The wedge at the end of the cartridge handle must be fully inserted into the compartment; otherwise the cartridge will not be able to insert into the DVR firmly, it could also cause damage by scraping the body of the DVR.
2. Connect the 4 power feeds for the cameras to the power connectors on the cable near the video ports of the DVR, connect the other end to the power supply and plug the power supply into a surge protector.
Chapter 4:System Boot - 4.4 Main Screen While the DVR is running, the monitor will display the view from the cameras as well as the following: Upper left: Percentage of hard drive space used.
Chapter 5: DVR Setup - 5.4 Record Mode There are two modes of resolution for video recording 1. Each Mode: The DVR compresses and records each video channel separately so the user can enlarge a single channel to full screen display and still be recording on all channels.
Estimated time would be 332 Hours Chapter 7: Playback Press [ Play] to play the last recording. Note: The DVR will play the last recording which has not been previously played until all recordings have been played. * Marks un-played video recording.
Numbers along bottom are hours of the day. Chapter 5: DVR Setup - 5.8 Sub Menu-Auto Record When the function is set to be "ON", DVR will be awaked to record automatically by schedule if DVR is without any manual operations in five minutes.
Chapter 5: DVR Setup - 5.16 Factory Reset Press the [ SEL] Button to reload factory defaults, then the DVR will reboot, all custom settings (including password) will be restored to default. There is no confirming dialog box for this selection after you press [...
HDD FORMAT: If you format the hard drive, it will erase all the data on the hard drive. Note: When you install a new hard drive in the DVR, please use this function to format the hard drive. Page 13 Menu] to save and exit.